User manual D-LINK DIR-100

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual D-LINK DIR-100. We hope that this D-LINK DIR-100 user guide will be useful to you.

Lastmanuals help download the user guide D-LINK DIR-100.


Mode d'emploi D-LINK DIR-100
Download

You may also download the following manuals related to this product:

   D-LINK DIR-100 VERSION 1.0 (7202 ko)

Manual abstract: user guide D-LINK DIR-100

Detailed instructions for use are in the User's Guide.

[. . . ] Table of Contents Table of Contents Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To disable this feature, enable AutoTime: reconnect. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. Connect Mode: Select either Always-on, Manual, or Connect-on demand. D-Link DIR-100 User Manual Section 3 - Configuration Internet Setup Big Pond User Name: Enter your Big Pond user name. Password: Enter your Big Pond password and then retype the password in the next box. Auth Server: Enter the IP address of the login server. Login Server IP: Enter the IP address of the login server. MAC Address: The default MAC Address is set to the WAN's physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. Clone MAC The default MAC address is set to the WAN's physical Address: interface MAC address on the Broadband Router. You can use the "Clone MAC Address" button to copy the MAC address of the Ethernet Card installed by your ISP and replace the WAN MAC address with the MAC address of the router. It is not recommended that you change the default MAC address unless required by your ISP. D-Link DIR-100 User Manual 3 Internet Setup Russia PPTP Choose Russia PPTP (Point-to-Point-Tunneling Protocol ) if your PPTP Internet connection requires a username and password to get online as well as a static route to access your ISP's internal network. Your ISP will provide you with a username and password. Certain ISPs in Russia use this type of connection. PPTP: Select Dynamic (most common) or Static. Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. Enter the IP address (Static PPTP only). Enter the Primary and Secondary DNS Server Addresses (Static PPTP only). Enter the Gateway IP Address provided by your ISP. The DNS server information will be supplied by your ISP (Internet Service Provider. ) Enter the Server IP provided by your ISP (optional). Enter your PPTP password and then retype the password in the next box. Enter a maximum idle time during which the Internet connection is maintained during inactivity. select Always-on as your Connection Mode. Maximum Transmission Unit - You may need to change the MTU for optimal performance. [. . . ] · To change the MTU enter the number in the MTU field and click the Apply button to save your settings. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DIR-100 User Manual 53 Appendix A - Assigning a Static IP Address Assigning a Static IP Address (for Windows® 2000/XP) Note: Broadband Routers will automatically assign IP Addresses to the computers on the network, using DHCP (Dynamic Host Configuration Protocol) technology. If you are using a DHCP-capable Gateway/Router you will not need to assign Static IP Addresses. If you are not using a DHCP capable Gateway/Router, or you need to assign a Static IP Address, please follow these instructions: · Go to Start · Double-click on Control Panel · Double-click on Network Connections D-Link DIR-100 User Manual 54 Appendix A - Assigning a Static IP Address · Right-click on Local Area Connections. · Double-click Properties · Highlight Internet Protocol(TCP/IP) · Click Properties · Select Use the following IP address in the Internet Protocol (TCP/ IP) Properties window (shown below. ) D-Link DIR-100 User Manual 55 Appendix A - Assigning a Static IP Address · Input your IP address and subnet mask. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE D-LINK DIR-100

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual D-LINK DIR-100 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag