User manual D-LINK DIR-809

[. . . ] Version 1. 01 | 2015/9/7 User Manual Wireless AC750 Dual Band Router DIR-809 Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision 1. 01 Date September 7, 2015 Description • Initial release for revision A3 Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Copyright © 2015 by D-Link Corporation, Inc. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation, Inc. D-Link DIR-809 User Manual i Table of Contents Preface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] It can be either a single port or a range of ports. Traffic Type: Select the protocol of the trigger port (TCP, UDP, or Both). Firewall: This is the port number on the Internet side that will be used to access the application. You may define a single port or a range of ports. You can use a comma to add multiple ports or port ranges. Traffic Type: Select the protocol of the firewall port (TCP, UDP, or Both). D-Link DIR-809 User Manual 44 Section 3 - Configuration MAC Filter Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing the network. You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the Broadband Router. Configure Select Turn MAC Filtering Off, Allow MAC addresses listed below, or Deny MAC MAC addresses listed below from the drop-down menu. Filtering: MAC Enter the MAC address you would like to filter. Address: To find the MAC address on a computer, please refer to the Networking Basics section in this manual. DHCP Client: Select a DHCP client from the drop-down menu and click << to copy that MAC Address. D-Link DIR-809 User Manual 45 Section 3 - Configuration Website Filters Website Filters are used to allow you to set up a list of Web sites that can be viewed by multiple users through the network. To use this feature select to Allow or Deny, enter the domain or website and click Save Settings. You must also select Apply Web Filter under the Access Control section. Add Website Select either DENY computers access to ONLY these sites or ALLOW Filtering computers access to ONLY these sites. Rule: Website URL Enter the URLs that you want to allow or block. Click Save Settings. D-Link DIR-809 User Manual 46 Section 3 - Configuration Traffic Control Traffic Control can guarantee bandwidth priority to specified LAN/Wireless clients. You can do this by setting up traffic control rules. Click Save Settings to apply your settings. Enable Traffic Select this function to control the access bandwidth of computers in LAN. Control: Automatic All of the computers in LAN will have their bandwidth distributed equally. Distribute Bandwidth: Key in Key in the value in kbps to setup the bandwidth manually. Download Bandwidth Manually: Key in Key in the value in kbps to setup the upload bandwidth manually. Upload Bandwidth Manually: Traffic When the option Automatic Distribute Bandwidth is unchecked, Control you can select Guarantee minimum bandwidth, Restrict Rules: maximum download bandwidth, or Restrict maximum upload bandwidth of specific IP addresses from their drop-down boxes. Schedule: The schedule of time when the filter will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. [. . . ] Secure your wireless network by turning on the WPA or WEP security feature on the router. Refer to product manual for detail information on how to set it up. Wireless Modes two modes of networking: There are basically • Infrastructure – All wireless clients will connect to an access point or wireless router. • Ad-Hoc – Directly connecting to another computer, for peer-to-peer communication, using wireless network adapters on each computer, such as two or more DIR-809 wireless network Cardbus adapters. An Infrastructure network contains an Access Point or wireless router. [. . . ]