User manual D-LINK DIR-860L

[. . . ] Version 1. 0 | 03/22/2013 User Manual Wireless AC1200 Dual Band Gigabit Router DIR-860L Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision 1. 0 Date March 28, 2013 • Initial release Description Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Copyright © 2013 by D-Link Corporation. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation. D-Link DIR-860L User Manual i Table of Contents Preface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 6rd IPv6 Prefix: Enter the 6rd IPv6 prefix settings supplied by your ISP. IPv4 Address: Your IPv4 address will appear here. Mask Length: Enter the desired IPv4 mask length. Assigned IPv6 When an IPv6 prefix is assigned, it will appear here. Prefix: 6rd Border Relay Enter the 6rd Border Relay IPv4 address settings supplied by your ISP. IPv4 Address: Primary/ Enter the primary and secondary DNS server addresses. Secondary DNS Address: LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address: Displays the Router’s LAN Link-Local Address. D-Link DIR-860L User Manual 64 Section 3 - Configuration Enable Automatic Check to enable the Automatic IPv6 Address Assignment feature. IPv6 Address Assignment: Autoconfiguration Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Type: DHCPv6. Router Advertisement Enter the IPv6 Address Lifetime (in minutes). Lifetime: D-Link DIR-860L User Manual 65 Section 3 - Configuration Link-Local Connectivity My IPv6 Select Link-Local Only from the drop-down menu. Connection Is: LAN IPv6 Address Displays the IPv6 address of the router. Settings: D-Link DIR-860L User Manual 66 Section 3 - Configuration mydlink Settings Devices that are mydlink-enabled can be accessed and managed through the mydlink website and by using mydlink mobile apps for iOS and Android. You cannot take advantage of these features without a mydlink account. If you have a mydlink account already, you can log in when you first set up the router, or by visiting this setup page. mydlink Service: Displays whether your device is registered with a mydlink account or not. mydlink E-mail: Displays the email address associated with your mydlink account if you have an active account. Register mydlink Click to go to the mydlink website to register your device or Service: edit your settings. D-Link DIR-860L User Manual 67 Section 3 - Configuration Virtual Server This page will allow you to open a single port. If you would like to open a range of ports, refer to the next page. Name: Enter a name for the rule or select an application from the drop-down menu. Select an application and click << to populate the fields. IP Address: Enter the IP address of the computer on your local network that you want to allow the incoming service to. [. . . ] Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router. Example: If the router´s LAN IP address is 192. 168. 0. 1, make your IP address 192. 168. 0. X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set the Default Gateway the same as the LAN IP address of your router (I. E. [. . . ]