User manual D-LINK DSC-350

[. . . ] 5. Available USB port for PCs Installing the Batteries The DSC-350 operates on 2 x AAA batteries. Insert 2 AAA Alkaline batteries, making sure the battery polarity (+) and (-) is the way it is shown on the battery cover compartment. Close the Battery compartment cover. Install the TWAIN & Device Drivers The TWAIN driver allows other applications to communicate with the DSC-350. You must install a TWAIN-compliant application (i. e. [. . . ] Select resolutions Snapshot This dual mode camera has 3 different resolutions to choose when taking still images. Press and hold the "Mode/Power" button first, and press shutter release button to switch to a different resolution. "SHI" mode: Under this mode, the images taken are in 1024x768 pixels resolution (by software interpolation). -8- "HI" mode: The images taken are in 640x480 pixels resolution. "S" mode: The pictures taken are in 320x240 pixels resolution. Video Recording You can choose between 2 resolutions when doing video recording. Use the same procedure to switch resolutions in video recording mode as you use in snapshot mode. "S" mode: The video taken is in 320x240 pixels resolution. The video taken is in 160x120 pixels resolution when there is no resolution indicator in the status LCD. Taking Pictures (DSC-350 Digital Camera and Video Camera) When taking still images or video recording: MAKE SURE THE DSC-350 is POWERED ON and SET AT THE MODE YOU NEED. Make sure you are able to locate the object you want to shoot through the view-finder. Note: 1. In order to save power, the camera will automatically power off if you don't use the camera for 1 minute. Power on the camera again, if you want to take pictures/video again. 2. You can check the memory left by holding "Delete/Remain" button. The LED display shows the percentage of memory left ( ) when you press and hold "Delete/Remain" button. Digital Still Camera (1) Press the "Mode/Power" button for 3 seconds to power on. (2) Choose DSC mode and setting resolution. (3) Use the Viewfinder to locate the object. -9- (4) Press the shutter release button for taking pictures. The DSC-350 takes approximately 1 second to save the image. When the green LED light stops blinking and the "BUSY" indicator disappear in the status LCD, the image saving is done and the DSC-350 ready for next shot. Note: The focus range is from approximately 1. 5 inch (4cm ) to infinity. Please refer to the following chart to set the focus. - 60 inch (1. 5M) ~ infinity. - Around 1. 5 inch ( 4 CM ). - 10 - 2. Video Recording (5) Press the "Mode/Power" button for 3 seconds to power on. [. . . ] AVI file has large file size but short image processing time. Mpeg1 file has small file size but long image processing time. 7. Erasing pictures: Select the pictures you want to erase and click on the "ERASE" button. Note: The images stored in the camera will be erased when you click the erase button. Make sure you want to delete the photos before clicking the "ERASE" button. [. . . ]