User manual D-LINK DVG-2001S

[. . . ] D-Link DVG-2001S VoIP Terminal Adapter Manual Building Networks for People Ver 1. 00 651US2001S15 Contents Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The port number used to access the VoIP Terminal Adapter. The default port number for web management is 80. User Password Remote Management Web Port Number 19 Tools > System Reset to Factory Default Click Reset to Factory Default to restore the settings. 20 Tools > Firmware You can upgrade the firmware of the VoIP Terminal Adapter here. Make sure the firmware you want to use is on the local hard drive of the computer. Please check the D-Link Support site for firmware updates at http://support. dlink. com. You can download firmware upgrades to your hard drive from the D-Link support site. Firmware Update Click on the link in this screen to find out if there is an updated firmware; if so, download the new firmware to your hard drive. Enter the firmware file name and DOS path in this field. For example, C:\firmware. had File Name Click Apply to complete the firmware upgrade. 21 Tools > Config This screen allows you to backup and restore configuration files. Click Backup to initiate the backing up of a configuration file. Click Upload to initiate the uploading of the configuration file once you have located it by using the Browse button. Tools > Save & Reboot This screen allows you to save and reboot the VoIP Terminal Adapter. Click the Reboot button. 22 Status > Device Info This page displays the current information for the DVG-2001S. WAN MAC Address: MAC address of the DVG-2001S IP Address: WAN/Public IP Address Subnet Mask: WAN/Public Subnet Mask Default Gateway: WAN/Public Gateway IP Address Status > Stats The VoIP Terminal Adapter keeps a running log of events and activities occurring on the device. If it is rebooted, the logs are automatically cleared. You may save the log files under Log Settings. 23 The screen above displays the Traffic Statistics. Here you can view the amount of packets that pass through the DVG-2001S on the WAN port. The traffic counter will reset if the device is rebooted or can be reset by clicking the Reset button. To refresh current statistics, click the Refresh button. 24 Status > Cable Tester The VoIP Terminal Adapter offers you to conduct a Ping test by entering the IP address in the field below and then clicking the test button. . 25 Help The Help tab will give basic information referring to various screens located in the VoIP Terminal Adapter. To view a specific section, click on its hyperlinked name. A new window of information will appear. 26 Technical Specifications Standards: IEEE 802. 3 IEEE 802. 3u Device Management: HTTP 1. 0 Web-Based - Internet Explorer v6 or later; Netscape Navigator v6 or later; or other Java-enabled browsers DHCP Client Auto-provisioning Telnet TFTP Client Performance monitoring using DSP/Ethernet statistics Operating Temperature: 32ºF to 131 ºF (0ºC to 55ºC) Humidity Range: 5% to 95% Non-condensing Safety and Emissions: FCC part15 LEDs: Power LAN Phone Physical Dimensions: L = 3. 25 inches (82. 46 mm) W = 3. 54 inches (90 mm) 27 Technical Specifications H = 1. 22 inches (31 mm) Security: User Authentication Administration ­ Username/Password control for Telnet and Web configuration SIP Authentication Provisioning Security using HTTPS and SSL/TLS client certificate encryption and authentication VoIP NAT Traversal ­ SIP/STUN Miscellaneous: PPPoE (RFC 2516) Power Input: Ext. Power Supply DC 12V, 1. 2A Weight: 0. 1225kg Warranty: 3 year (depends on D-Link global warranty policy) Telephony Support: Call Control Protocol ­ SIP (RFC 3261) CODEC ­ G. 711 (A-law and U-law), G. 723. 1, G. 726, and G. 729A Echo Cancellation ­ G. 168 DTMF Relay ­ G. 711 (in band) FAX Support 28 Frequently Asked Questions Why can´t I access the web based configuration?When entering the IP Address of the DVG-2001S (10. 1. 1. 1), you are not connecting to the Internet or have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. [. . . ] Select PPPoE. S t e p 5 In the username field enter ELN/username@earthlink. net and your password, where username is your own username. For SBC Global users, enter username@sbcglobal. net. For Ameritech users, enter username@ameritech. net. For BellSouth users, enter username@bellsouth. net. For Mindspring users, enter username@mindspring. com. [. . . ]