User manual D-LINK DVG-G1402S

[. . . ] DVG-G1402S User's Manual Table of Contents Table of Contents Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Enter the starting port you want to open. The global port is the incoming (from the Internet) port. If you want to open only one port, enter the same port as the Starting Global Port. Enter the starting port you want to open. The local port is the port used on your computer. In most cases, the global and local ports will be the same. If you want to open only one port, enter the same port as the Starting Local Port. Click Apply to save your settings. End Local Port: Apply: D-Link Systems, Inc. 31 DVG-G1402S User's Manual Using the Configuration Utility Using the Configuration Utility (continued) Advanced > FIlter > IP Filter Pass or Block: Protocol: IP Address - Source: IP Address - Destination: Subnet Mask - Source: Subnet Mask - Destination: Source Start/End Port: Destination Start/End Port: TCP Flag: Firewall Rule State: Apply: Select Block or Pass. Select the protocol type: TCP, UDP, or Both. Enter the IP address of the source computer. Enter the IP address of the destination computer. Enter the subnet mask of the source computer. Enter the subnet mask of the destination computer. If you want to open only one port, enter the same port in both boxes. In most cases, the source and destination port(s) will be the same. Check the box to enable each of the optional TCP packet options. Click Apply to save your settings. D-Link Systems, Inc. 32 DVG-G1402S User's Manual Using the Configuration Utility Using the Configuration Utility (continued) Advanced > FIlter > MAC Filter MAC Address: State: Apply: MAC Table: Enter the MAC address of the wired computer or device to allow connectivity to the DVG-G1402S. The MAC table will list the current "rules". Click the edit button to make any changes or click the trash can icon to delete the rule. D-Link Systems, Inc. 33 DVG-G1402S User's Manual Using the Configuration Utility Using the Configuration Utility (continued) Advanced > Firewall Pass or Block: Protocol: IP Address Source: IP Address Destination: Subnet Mask Source: Subnet Mask Destination: Source Start/End Port: Destination Start/End Port: Enter the MAC address of the computer or device to allow connectivity to the DVG-G1402S. Enter the IP address of the source computer. Enter the IP address of the destination computer. Enter the subnet mask of the source computer. [. . . ] This limited warranty provides specific legal rights and the product owner may also have other rights which vary from state to state. Trademarks: D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their respective manufacturers or owners. Copyright Statement: No part of this publication or documentation accompanying this Product may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc. , as stipulated by the United States Copyright Act of 1976. [. . . ]