User manual D-LINK DWL-810+ QUICK INSTALLATION GUIDE

[. . . ] This product can be set up using any current web browser, i. e. , Internet Explorer 6 or Netscape Navigator 6. 2. 3. DWL-810+ D-Link AirPlusTM Ethernet-to-Wireless Bridge Before You Begin You must have at least the following: · An Ethernet-enabled device, such as a game console, laptop or desktop computer, network printer or set-top box that will connect to the DWL-810+ Check Your Package Contents DWL-810+ Ethernet-to-Wireless Bridge CD-ROM (Manual and Warranty) Ethernet (CAT5 UTP) Cable Using a power supply with a different voltage rating will damage this product and void its warranty. 5V DC 2. 5A Power Adapter If any of the above items are missing, please contact your reseller. ©2002 D-Link Systems, Inc. Trademarks or registered trademarks are the property of their respective holders. [. . . ] Antenna Used to wirelessly connect to 802. 11b networks. LAN Port This is the connection for Ethernet cables to your Ethernet-enabled device. A. Receptor for Power Adapter 2 Connecting the DWL-810+ in Infrastructure Mode Setup #1 Connect an Ethernet cable from the DWL-810+ to your Ethernet enabled: Desktop PC, Laptop PC, Set-Top-Box, or Gaming Console. 3 Connecting the DWL-810+ in Ad-Hoc Mode Setup #2 or or Web-based Configuration Before You Begin the Configuration · It's best to use a computer (with an Ethernet adapter) that is connected to a switch for configuring the DWL-810+. (Note: You also have the option of connecting the DWL810+ directly to the computer that will be used for configuration). The default IP address for the DWL-810+ is 192. 168. 0. 30 with a Subnet Mask of 255. 255. 255. 0. You will need to assign your computer a Static IP address within the same range as the DWL-810+'s IP address for the purpose of configuring the DWL-810+. See the Manual on the CD-ROM if you need assistance in assigning a Static IP address for your network adapter. Open your Web browser and type "http://192. 168. 0. 30" into the URL address box. Then press the Enter or Return key. 4 Continued. . . The logon pop-up screen will appear. Type "admin" for the username and leave the password field blank. Click OK Once you have logged in, the Home screen will appear. Click Run Wizard You will see the following screens. Click Next 5 Continued. . . Step 1 - Set up your new password. You have the option to establish a password. Click Next Step 2 - Wireless Setup The default wireless settings are: SSID = default Channel = 6 Operating Mode = Infrastructure Click Site Survey to select a wireless network or you can change the settings manually to match an existing wireless network. For Set Up #2 select Ad-hoc as the operating mode. Click Next Step 3 - Encryption The DWL-810+ is capable of three levels of wireless encryption - 64-bit, 128-bit, and 256-bit. You can change the encryption settings for more secure wireless communication. Click Next 6 Click Restart Click Close You have completed the Configuration of the DWL-810+! 7 Appendix Assigning a Static IP Address in Windows To assign a Static IP Address to the laptop or computer that you are using to configure the DWL-810+, please do the following: Note: The following screens are taken using Windows XP. [. . . ] customers can contact D-Link technical support through our web site or by phone. D-Link Technical Support over the Telephone: (877) 453-5465 24 hours a day, seven days a week D-Link Technical Support over the Internet: http://support. dlink. com email: support@dlink. com 12 [. . . ]