User manual D-LINK DXS-3300 COMMAND LINE INTERFACE REFERENCE GUIDE

[. . . ] CLI Manual Product Model : xStackTM DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch Release 4. 30 ©Copyright 2006. All rights reserved. xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Using the Console CLI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Command Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] <string 15> - Enter an alphanumeric string of up to 15 characters to define the previously created server group. This group may add any combination of server hosts to it, regardless of protocol. protocol ­ Enter the protocol utilized by the server host. There are four options: tacacs ­ Use this parameter to define the protocol if the server host is using the TACACS authentication protocol. xtacacs ­ Use this parameter to define the protocol if the server host is using the XTACACS authentication protocol. tacacs+ ­ Use this parameter to define the protocol if the server host is using the TACACS+ authentication protocol. radius ­ Use this parameter to define the protocol if the server host is using the RADIUS authentication protocol. Restrictions Example usage: To add an authentication host to server group "group_1": DGS-3324SRi:4#config authen server_group group_1 add server_host 10. 1. 1. 121 protocol tacacs+ Command: config authen server_group group_1 add server_host 10. 1. 1. 121 protocol tacacs+ Success. DGS-3324SRi:4# Only administrator-level users can issue this command. delete authen server_group Purpose Syntax Description Parameters Restrictions Used to delete a user-defined authentication server group. delete authen server_group <string 15> This command will delete an authentication server group. <string 15> - Enter an alphanumeric string of up to 15 characters to define the previously created server group to delete. Only administrator-level users can issue this command. 171 xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual Example usage: To delete the server group "group_1": DGS-3324SRi:4#delete server_group group_1 Command: delete server_group group_1 Success. DGS-3324SRi:4# show authen server_group Purpose Syntax Description Used to view authentication server groups on the Switch. show authen server_group <string 15> This command will display authentication server groups currently configured on the Switch. This command will display the following fields: Group Name: The name of the server group currently configured on the Switch, including built in groups and user defined groups. IP Address: The IP address of the server host. Protocol: The authentication protocol used by the server host. Parameters <string 15> - Enter an alphanumeric string of up to 15 characters to define the previously created server group to view. Entering this command without the <string> parameter will display all authentication server groups on the Switch. Restrictions None. DGS-3324SRi:4#show authen server_group Command: show authen server_group Group Name IP Address Protocol -----------------------------------radius ---------------------------------------Darren 10. 53. 13. 2 TACACS tacacs 10. 53. 13. 94 TACACS tacacs+ ---------------------------------------xtacacs ---------------------------------------Total Entries : 4 DGS-3324SRi:4# config authen parameter response_timeout Purpose Syntax Description Used to configure the amount of time the Switch will wait for a user to enter authentication before timing out. config authen parameter response_timeout <int 0-255> This command will set the time the Switch will wait for a response of authentication from the user. 172 xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual config authen parameter response_timeout Parameters response_timeout <int 0-255> - Set the time, in seconds, the Switch will wait for a response of authentication from the user attempting to log in from the command line interface or telnet interface. [. . . ] <target_path_filename 64> - Enter the new name and path of the file to be renamed. This entry cannot exceed 64 characters in length. Restrictions Example usage: To rename a file: DGS-3324SRi:4#rename c:/abc. txt c:/cba. txt Command: rename c:/abc. txt c:/cba. txt Done!!DGS-3324SRi:4# Only administrator-level users can issue this command. rmdir Purpose Syntax Description Parameters Restrictions Example usage: To delete a directory: DGS-3324SRi:4#rmdir c:/test Command: rmdir c:/test Done!! [. . . ]