Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual DA-LITE 26P. We hope that this DA-LITE 26P user guide will be useful to you.
Lastmanuals help download the user guide DA-LITE 26P.
You may also download the following manuals related to this product:
DA-LITE 26P REV 08-10 (710 ko)
Manual abstract: user guide DA-LITE 26PREV 11-08
Detailed instructions for use are in the User's Guide.
[. . . ] The surface to which this unit is mounted must be capable of supporting a static load of four times the combined weight of the projector and mount. Do not attach to plaster or drywall alone.
IMPORTANT SAFETY INSTRUCTIONS
When using your video equipment, basic safety precautions should always be followed, including the following: 1. Read and understand all instructions before using. [. . . ] Secure the projector and mount to the DaLift. Use the features shown to adjust the projector's position. Projector lens should not protrude past allthread centerline.
Figure 7
PROJECTOR
DALIFT MODEL 26P
"A" 161/2" 21"
"B" 153/8" 197/8"
6. Determine where the projector will be located and make a hole in the ceiling and create a tile for the DaLift.
CUTOUT
"A"
TRIM PIECE HAS TO FIT INSIDE CUTOUT SCRAP
Figure 8
TILE HAS TO FIT INSIDE CEILING TILE HOLDER
"B"
7.
CHANNEL NOTE: ITEMS CALLED OUT ARE NOT SUPPLIED
3/8" ALLTHREAD 3/8" HEX NUT
3/8" FLAT WASHER 3/8" FLAT WASHER
3/8" LOCK HEX NUT
Figure 9
"UP"
8. Lower DaLift by connecting the power supply to 120 volt AC power. Use the switch shown to operate the DaLift. The "Stop" button is needed only for intermediate stopping. Avoid pinch points when operating DaLift with builtin switch.
CONNECT TO 120V AC "STOP" "DOWN"
WARNING! AVOID PINCH POINTS WHEN OPERATING DALIFT WITH THIS SWITCH
CEILING TILE HOLDER CAP
Figure 10
11. Install Ceiling Tile cutout from step 6 into Ceiling Tile Holder and assemble Ceiling Tile Holder Cap. Figure 11
CEILING TILE CEILING TILE HOLDER CAP
14. May need to adjust position of Ceiling Tile Holder to clear Trim. Use provided Cable Ties for cable management. Allow enough slack in the cords for projector movement.
CABLE TIE HOLES
TRIM
A
13. Use a licensed electrician to wire the DaLift. [. . . ] The use of an accessory attachment not recommended by the manufacturer may cause a risk of fire, electric shock, or injury to persons. Remove contents from carton and examine for damaged or missing parts.
SAVE THESE INSTRUCTIONS Required Tools:
Phillips screwdriver
REMOVE END PIECE
Figure 1
A
2. The end panel may be discarded but save the fasteners. Secure the Plenum Cover End to the DaLift using the fasteners from step 2. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DA-LITE 26P
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual DA-LITE 26P will begin.
DA-LITE 26P REV 08-10 (710 ko)
