Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual DA-LITE FRAMING. We hope that this DA-LITE FRAMING user guide will be useful to you.
Lastmanuals help download the user guide DA-LITE FRAMING.
Manual abstract: user guide DA-LITE FRAMINGDATASHEET
Detailed instructions for use are in the User's Guide.
[. . . ] REAR
PROJECTION
SCREENS
FRAMING: STANDARD AND BASE FRAMES
Frame Cross Section And Size Selection Information: Select the Frame: Standard Frame · Same rugged construction and design as Deluxe Frame, but 2" x 13/4" (50. 8 mm x 45 mm). · For screen panels up to 6' x 10' x 3/8". [. . . ] · Lightweight extruded aluminum U-channel. 23. 81 mm wall thickness and weighs approximately 5 oz. Secured at the corners with self-tapping screws and mounting clips. · Mitered corners eliminate rear light leaks without caulking. · Available in an anodized black finish. · Frame dimensions equal viewing area plus 21/2". Specify the Size of Framed Screens: The customer must specify overall size of the frame outside dimension (not size of opening) and must be careful to allow for the space required to fit the factory framed screen into the opening. Framing Detail Factory-Installed Frame:
Framed Da-Lite in-wall rear projection screens should be mounted in a vertical position, resting on the bottom of the frame on a suitably reinforced surface in an aperture in a wall or partition. The unit should be shimmed and fixed in position with appropriate moldings to lock the framed panel in position.
Da-Lite's Polacoat®, Da-Plex And Da-Glas Screens
Factory Framed Screens: · For installation ease, screens are available in factory frames. · All frames are of 6063-T5 aluminum alloy with 204A1R1 black anodized finish. [. . . ] (1. 48 kg/m) Frame Size Equals Screen Viewing Area Plus 4" (101. 6 mm) Viewing Area Is H x W
Setting Block
1/2" (12. 7 mm)
Dovetailed Aluminum Tube 5/32" Wall (4 mm)
1/2" (12. 7 mm) 2" (44. 5 mm) 1-7/16" (36 mm) 1" (25. 4 mm) Frame Size 5/64" wall (2 mm) 1-3/4" wall (44. 5 mm) Viewing Area 2" (44. 5 mm)
Tolerance on Frame Size Is ± 1/4" (6. 4 mm)
Base Frame
Approximate Net Weight Per Linear Foot: 5 oz. (0. 142 kg/m) Frame Size Equals Viewing Area Plus 2-1/2" (63. 5 mm) Vinyl Gasket Viewing Area Is H x W 3/8" 1-1/4" 3/32" Frame Size 7/16" Horizontal Viewing Area 1-1/4" (31. 75 mm) 1-1/4" (31. 75 mm)
1/4" Da-Plex or Da-Glas Rear Projection Screen Panel
Tolerance on Frame Size Is ± 1/4" (6. 4 mm)
8
www. da-lite. com · info@da-lite. com [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DA-LITE FRAMING
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual DA-LITE FRAMING will begin.
