User manual DA-LITE MM5C-39FS PARTS LIST 8472

[. . . ] Any sudden stop could cause instability of the stand and could cause serious injury and/or damage. [. . . ] Always push from the side of the cart, never from the front or back of the cart. Required Tools: - - - 7/16" wrench 9/16" socket Phillips screwdriver Ratchet and extensions Procedure 1. Remove contents from carton and examine for damaged or missing parts. The keys for the cabinet doors are tied to the outside of the cart. 2. For maximum braking capacity, the two brake casters should be installed diagonally across from each other. Figure 1 3. See Figure 5. Note: It is the responsibility of the installer to obtain any additional fasteners needed to secure the Hanging Brackets to the flat panel unit. Figure 5 7. Hang the flat panel unit on the Flat Panel Mount Assembly making sure the top and bottom notches of each Hanging Bracket are placed over the upper and lower Zee-Bars. 8. Slide the Security Bar through the slots in the Hanging Brackets and Mount, bolt one end to the Zee Bar and then secure the opposite end with the padlock. See Figures 6 and 7. Figure 6 Figure 7 9. [. . . ] See Figures 6 and 7. Figure 6 Figure 7 9. [. . . ]