User manual DA-LITE MODEL C WITH CSR

[. . . ] The Da-Lite Difference. Operating Instructions for (Controlled screen return) DA-LITE SCREEN COMPANY, INC. 3100 North Detroit Street Post Office Box 137 Warsaw, Indiana 46581-0137 Phone: 574-267-8101 800-622-3737 Fax: 574-267-7804 Toll Free Fax: 877-325-4832 www. da-lite. com e-mail: info@da-lite. com MOdel C wIth Csr Model C with CSR (Controlled Screen Return) is a feature offered exclusively by Da-Lite to assist the quiet controlled return of the screen into the case. YOU HAVE MADE A WISE SELECTION. . . in choosing a Da-Lite projection screen, designed and engineered to produce the sharpest, most pleasing pictures with maximum convenience. Select fasteners of proper type for wall or ceiling involved. [. . . ] Be sure surface is locked before releasing. NOTE: This screen will not lock into position in the upper portion of its travel. TO RE-ROLL YOUR PICTURE SURFACE The Model C operates on the same principle as a window shade. Pull down about 4 inches to disengage the locking dog and start the fabric up firmly and quickly. Large picture surfaces are heavy and will start up too slowly to prevent the locking dog from catching unless help is provided, so keep picture surface moving briskly. Should the locking dog catch, pull the picture surface down about 4 inches and start the surface up rapidly. The CSR feature of this screen will allow the screen to stop, as normal, in the bottom portion of its travel. The screen will not stop in the top portion of its travel, but will continue slowly and gently into the case. To view an online Model C with CSR retraction tutorial, please visit http://www. da-lite. com/products/product_flash/modelc_csr/. PROTECT YOUR SCREEN Before re-rolling surface into case, examine both front and back of surface to be sure they are free of foreign matter. 1 SUGGESTED METHODS OF INSTALLATION FOR WALL WALL MOUNTED CEILING HANGING FOR CEILING PICTURE SURFACE PICTURE SURFACE PICTURE SURFACE USE No. 6 BRACKETS TO HANG BEHIND BEAM OR VALANCE PICTURE SURFACE CONCEALED (ALLOW ROOM FOR ACCESS) MODEL C EXCLUSIVE FEATURES · · · · · · · Easily Installed Multi-Purpose End Caps Form Sturdy Brackets for Wall/Ceiling Installation Large Screens Have Aluminum Slat Saddle to Distribute Uniform Tension on Picture Surface Heavy Duty Grooved Metal Roller Assures Permanent Fastening of Picture Surface Nylon and Ball Bearing Roller Mounting Handsome, Rugged, Powder Coated Steel Case Floating Mounting Brackets Ceiling Trim Kit (optional at extra cost) HANGING BRACKETS (Optional at extra cost) No. 11 Wall Bracket Non-Adjustable permits screen to extend 10" or 14" from wall. 6 Wall Bracket Non-Adjustable permits screen to extend 6" from wall. Over 8 seconds retracting from the bottom into the case. Under 3 seconds retracting from the bottom into the case. Screen is retracting too slowly, and then slams the case when adjusted counterclockwise. [. . . ] (b) The CSR has been over adjusted counterclockwise. (c) The roller tube is bent and binding. 4. 5. Screen does not stay down. (a) Locking procedure. (b) Dog is not locking. *To view an online Model C with CSR retraction tutorial, please visit http://www. da-lite. com/products/product_flash/modelc_csr/. DA-LITE IS MORE THAN PROJECTION SCREENS Da-Lite Tripod, Wall and Ceiling and Electric Screens Da-Lite Mounting Systems Da-Lite Project-O-Stands and Easels Da-Lite Lecterns Printed in U. S. A. 80162 Rev. [. . . ]