User manual DA-LITE SCENIC ROLLER PROJECTION SCREEN
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual DA-LITE SCENIC ROLLER PROJECTION SCREEN. We hope that this DA-LITE SCENIC ROLLER PROJECTION SCREEN user guide will be useful to you.
Lastmanuals help download the user guide DA-LITE SCENIC ROLLER PROJECTION SCREEN.
Manual abstract: user guide DA-LITE SCENIC ROLLER PROJECTION SCREEN
Detailed instructions for use are in the User's Guide.
[. . . ] Instruction Book For
Scenic Roller Projection Screen
The POWER In PRESENTATION PRODUCTS
DA-LITE SCREEN COMPANY, INC.
3100 North Detroit Street Post Office Box 137 Warsaw, Indiana 46581-0137 Phone: 574/267-8101 800-622-3737 Fax: 574/267-7804 http:// www. da-lite. com e-mail: info@da-lite. com
PRE-INSTALLATION
1. Having decided on hooks, chains, cables or other mounting method, have mounting prepared before opening box. Do not mount screen against walls that might rub fabric. [. . . ] Drop the closed loop of the turnbuckle in the slot of the center clamp before inserting bolt. Do not tighten nuts any more than finger tight. Make sure the ends of clamps do not push into the fabric. Pulleys at each end of header must be in the vertical position, when hung for proper operation. 5 Adjust top header in fabric pocket to the 2-1/4" and 3-3/4" position shown on the drawing. Hang the screen in place at 3 points only.
!When this screen is shipped from the factory, there are 2-1/2 turns of rope around each end of the roller. Make certain that this is left unchanged to insure good operation. Before Dropping fabric make certain ropes at end of bottom roller do not overlap. Overlapping of ropes will cause rope to work inward and thus damage the fabric.
CLAMP ASSEMBLY ILLUSTRATION B
SCREEN ADJUSTMENT
1. Lower screen slowly by gradually releasing ropes. With screen in the "Down" position, turn the header in the fabric pocket carefully to adjust the pulleys to a vertical end position. Check the 2-1/4" and 3-3/4" end tube dimensions. Adjust the three clamps on the reinforcement tape. [. . . ] Before raising screen, be sure both front and back sides are free from insects or any foreign matter. Form the habit of looking in space between fabric and roller for foreign matter before raising screen. Caution stage hands and others to avoid bumping screen with ladders, scenery, etc.
1
TURNBUCKLE - ADJUST FOR FLAT FABRIC HANG LOCATE CLAMPS ON REINFORCEMENT TAPE 6" 3 /4"
3
MOUNT AT THESE THREE POINTS ONLY
6" 2 /4"
1
MOUNT HEADER TUBE LEVEL
DA-LITE SCENIC
ADJUST ROPE CLAMP FOR PROPER FULL SCREEN OPENING
PULLY MUST BE INSTALLED IN THE VERTICAL POSITION OF SCREEN
2
CHECK HERE FOR FOREIGN MATTER BEFORE RAISING SCREEN
DO NOT HANDLE UNIT BY FABRIC AREA
HANDLE UNIT ONLY BY TOP HEADER AND ROLLER ENDS DURING INSTALLATION
Illustration A
Printed in U. S. A.
3
45037 Rev. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DA-LITE SCENIC ROLLER PROJECTION SCREEN
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual DA-LITE SCENIC ROLLER PROJECTION SCREEN will begin.
