User manual DA-LITE VERSATOL

[. . . ] QUALITY FEATURES FOR BETTER PICTURES, EASIER OPERATION, LONGER LIFE DA-LITE IS MORE THAN PROJECTION SCREENS Da-Lite Tripod, Wall and Ceiling and Electric Screens The POWER In PRESENTATION PRODUCTS · Available with Glass Beaded or Matte White Picture Surface · Exclusive Da-Lite Camlok® Metal Roller System prevents accidental pulling of screen surface from roller HEAVY-DUTY CARRYING CASE (optional) Protect your screen's case. Screen handle protrudes for easy carrying. Sizes available for all tripod screen models. · Automatic Push-Button Operation · Seamless Picture Area · Decorator Styled Cases · Built-In Fingertip Tension Lock Da-Lite Monitor Mounts · Steel Slat and Saddle on 60", 70" and 84" wide screens · Durable Tripod and Extension Tube Da-Lite Lecterns · "Gable" Constructed Tripod Legs · No-Mar Tripod Shoes Protect Floors · Wide Adjustable Pull Bail · Wide Range Height Adjustment · Tension Lever Lock for Position Adjustment Da-Lite Project-O-Stands and Easels Assembly Instructions for VERSATOL® DA-LITE SCREEN COMPANY, INC. 3100 North Detroit Street Post Office Box 137 Warsaw, Indiana 46581-0137 Phone: 574-267-8101 800-622-3737 Fax: 574-267-7804 www. da-lite. com e-mail: info@da-lite. com 46424 Rev. [. . . ] Press lightly down on handle until surface is taut. Lock into position by pressing down on fingertip tension lock. HOW TO USE NOTE: Keystone Eliminator is not included on Video format and 84" x 84" models. Open screen in usual manner by pressing push button. Raise Eliminator to position shown below and secure by hooking ring over gooseneck. Lift screen surface and hook bail into one of the slots in the Eliminator. The slot used will determine the degree of tilt of the surface. The screen may then be raised and lowered to the desired position by following the screen operating instructions. To close, lower screen surface until bail can be easily reached. Carefully lift bail from Eliminator slot and lower surface into case. Lift ring from gooseneck and return Eliminator to original position. Close screen in normal manner. CLOSING THE SCREEN 1. Lift fingertip tension lock to release tension. Lift extension tube slightly to release tension. Press "Push" button with your thumb. Lower extension tube slowly with your hand allowing surface to re-roll partially into case. Lift pull bail from gooseneck and slowly complete re-rolling picture surface into case. [. . . ] Use caution in tensioning screen surface when using Keystone Eliminator. Don't over-tension! Before re-rolling surface into case, examine both front and back of surface to be sure they are free of foreign matter. A Da-Lite Screen carrying case is a wise and economical investment. [. . . ]