Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual DA-LITE WB-100. We hope that this DA-LITE WB-100 user guide will be useful to you.
Lastmanuals help download the user guide DA-LITE WB-100.
Detailed instructions for use are in the User's Guide.
[. . . ] The surface to which this unit is mounted must be capable of supporting a static load of four times the combined weight of the audio/visual device and mount. Do not attach to plaster, paneling or drywall alone. Consult with an architect or building engineer regarding wall strength.
These instructions are intended for use on preconstruction installations. [. . . ] Consult with an architect or building engineer regarding wall strength.
These instructions are intended for use on preconstruction installations. This unit can be installed in an existing finished wall but will require additional drywall finish work and extra effort so as to minimize the drywall finish work needed. Use extreme caution when installing the unit post-construction so that no one cuts into existing electric wires, gas lines, water lines or other utilities hidden by the finished wall. Serious personal injury could occur.
Required Tools:
1/2" wrench Drill motor Drill bits
Saw Carpenter level
Procedure
1. Remove contents from carton and examine for damaged or missing parts.
2. The fastener kit listed below is available for wood stud wall construction. Determine the location of the mounting hardware and follow the directions for installation. Suggestion: a junction box will fit horizontally above the ½" conduit knockouts or vertically in the lower half of the Wall Box.
7. Place the Wall Box into the opening such that the Four Screw Studs in a row are near the top and that the back of the Wall Box is flush with the backside of the 2x4. Insert the leveling screws into the threaded holes on the bottom flange of the Wall Box. Use shims on the sides to adjust the position of the Wall Box. Use shims all around the Wall Box to fill the gap between the Wall Box and framing near the Fastening Holes. Fasten the Wall Box to the wood stud frame using 3/8" diameter lag screws (not included). Complete the wiring for the Wall Box and finish construction of the wall.
FOUR SCREW STUDS
B
Figure 3
11. [. . . ] Use shims all around the Wall Box to fill the gap between the Wall Box and framing near the Fastening Holes. Fasten the Wall Box to the wood stud frame using 3/8" diameter lag screws (not included). Complete the wiring for the Wall Box and finish construction of the wall.
FOUR SCREW STUDS
B
Figure 3
11. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DA-LITE WB-100
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual DA-LITE WB-100 will begin.
DA-LITE WB-100 REV 11-08 (208 ko)
