User manual DAEWOO 14A5

[. . . ] Used batteries should be disposed of properly. AERIAL CONNECTION For better picture and sound quality, an effective aerial installation is the most important. If you are located in a relatively strong area, you will be able to use the indoor aerial. When using an outdoor aerial, it is ususlly connected to the set by means of 75 ohm coaxial cable. The working life of this set is 7 years since its production date and this set may be dangerous for the life, health and the property of the consumer, and for the environment on expiry of its working life. 3 MAINS CONNECTION Plug the mains cable into the power socket with 220V/50Hz AC. SWITCHING THE SET ON AND OFF Switching On Switch the set on with the MAIN POWER button, ( ). If not, press either : - PR UP or DOWN button on the front of set - or POWER button or the UP/DOWN button or one of the NUMBER button 0. . 9 on the remote controller. [. . . ] To stop searching, press the MENU button. FINE TUNING If you are unable to get a good picture or sound because of a poor broadcasting signal, it is possible to adjust the fine tuning. Move the cursor to and press UP or DOWN button to activate fine tuning up or down. It obly operates whilst the UP or DOWN button is being pressed. ENTER A STATION NAME Select station name in the station name list with UP/DOWN button and press OK button. If you want to delete a station name, select "----". If you can't find the desired name in the list, you can enter your own. To do so, move the cursor to the right and press OK button. Using the UP/DOWN button, select the desired letter, number or blank. Press the RIGHT button to select the next position. Press the OK button to complete this procedure. TO STORE PROGRAMME IN MEMORY Move the cursor to the right end with the LEFT/RIGHT button. Select the programme number that you want to store current displaying programme with station name, fine tuning data and system (FRANCE only) in memory using the UP/DOWN button or NUMBER 0. . 9. Press the OK button. PRESET P01 P SEARCH PRESET UHF >> P01 P FINE TUNE PRESET UHF >> P01 ---ARD ZDF BR3 SAT1 PR07 PRESET P P01 BBC1 P PRESET P01 BBC1 P02 6 DAILY USE SELECTING A PROGRAMME NUMBER The set has a total of 70 programme numbers, 0. . 69. The NUMBER button 0. . 9 are used for direct programme selection. In order to select two-digit programm, press the second numbered button within two seconds. Switch through the programme number step by step with the UP/DOWN button. VOLUME AND PICTURE CONTROL VOLUME CONTROL Adjust the volume with the VOLUME ( ) DOWN/UP buttons on the front of the set, or with the LEFT/RIGHT button on the remote control. MUTE Pressing the MUTE button ( ) once turns the sound off. The sound returns if the button is pressed once more or the programme no. NORMAL PICTURE SELECTION When you press the NORMAL button repeatedly you can call up three picture settings' for NORMAL I(hard picture), NORMAL II(soft picture), FAVOURITE (adjustable picture). PICTURE CONTROL Press the MENU button to call up the MAIN MENU. Press the OK button to call up the PICTURE menu. [. . . ] PAGE HOLD Several sub pages can be combined under a page number and are scrolled at an interval determined by the television station. The presence of sub pages is indicated by, for exemple, 3/6 beneath the time, which means that you are looking at the 3rd page of a total of 6 pages. If you want to look at a subpage for a longer period of time, press the HOLD ( ) button. The AV ( ) will be displayed on the screen with the current programme number. [. . . ]