User manual DAEWOO DDQ-20L6SC

[. . . ] TV / DVD COMBO OWNER'S MANUAL Model: ·DDQ-20L6SC CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance. WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. NOTE TO CATV SYSTEM INSTALLER THIS REMINDER IS PROVIDED TO CALL THE CATV SYSTEM INSTALLER'S ATTENTION TO ARTICLE 820-40 OF THE NEC THAT PROVIDES GUIDELINES FOR PROPER GROUNDING AND, IN PARTICULAR, SPECIFIES THAT THE CABLE GROUND SHALL BE CONNECTED TO THE GROUNDING SYSTEM OF THE BUILDING, AS CLOSE TO THE POINT OF CABLE ENTRY AS PRACTICAL. CAUTION The AC power cord provided with this product is polarized (one blade wider than the other). To prevent electrical shock, match wide blade of plug to wide slot, fully insert the AC plug into a standard 120V~, 60Hz polarized outlet. NOTE Never connect the plug to an electrical source other than one providing 120V~, 60Hz power. If the polarized AC cord does not fit into a non-polarized outlet, do not cut or file the blade. [. . . ] When the button is pressed during playback a unit(chapter or track), it returns to the start of the unit. When it is pressed again, it skips back whenever the button is pressed. If you press the [SKIP+ ] button or [SKIP] button when Tuning Play menu of VCD2. 0 is displayed, sometimes menu screen may be displayed again. 26 Playing the DVD Video Disc Search Forward Press the [F. F/STEP ] button during playback. Each time the button is pressed, you can search the picture forward (at Play ---> x2 ---> x4 ---> x16 ---> x100 ---> . . . speed) Search Back Press the [F. R/STEP ] button during playback. Each time the button is pressed, you can search the picture back (at Play ---> x2 ---> x4 ---> x16 ---> x100 ---> . . . speed) Forward Playback in Slow-Motion {DVD/VCD} Press the [F. F/STEP ] button during the paused mode. Each time the button is pressed, you can play the screen in slow-motion (at Pause ---> x1/16 ---> x1/8 ---> x1/4 ---> x1/2 ---> . . . speed) Reverse Playback in Slow-Motion {DVD/VCD} Press the [F. R/STEP ] button during the paused mode. Each time the button is pressed, you can play the screen in slow-motion (at Pause ---> x1/16 ---> x1/8 ---> x1/4 ---> x1/2 ---> . . . speed) N · · · · · · · O T E The sound is muted during slow-motion play or search scene. But, the speed sound is audible during searching an Audio CD forward/back. Search speed increases up to 3 steps for VCD. (x2, x4, x8) Search speed of Audio CD can be increased only up to x2. Subtitles do not appear on the screen during slow-motion play. Slow-motion play increases up to 3 steps for VCD. (x1/4, x1/8, x1/16) Reverse playback in slow-motion is not available for VCD. Slow-motion play is not available for Audio CD. SCREEN SAVER The Screen saver is useful for preventing your display from becoming damaged. The screen saver picture appears when you leave the TV/DVD in stop mode for about 3 minutes. 27 Using Display Button To Display GUI Menu This unit features GUI(Graphic User Interface) Menu showing disc information (title /chapter /track number, elapsed playing time, audio/ subtitle language, angle, and sound) and TV/DVD information (repeat play, play mode, marker, etc. ) Some icons only show the indicated information. Other icons allow the settings to be changed. CH/SELECT CH/SELECT 1 2 Press the [DISPLAY] button during playback. Title function can be accessed from the stop mode. Press the [ , ] button to select the desired item. The current selected item is indicated in yellow on its GUI menu. (DVD GUI) 1 1 0:16:57 1 ENG D 6 CH OFF 1 NORM. It shows the current title number. Jump to the desired title number by pressing the [ , ] button or the [NUMBER] button, then press the [ENTER] button. Jump to the desired chapter number by pressing the [ , ] button or the [NUMBER] button, then press the [ENTER] button. [. . . ] Remove from magnetic fields or rotate set until purity error disappears. Check the connection of antenna cable (incorrect connection or disconnection). Plug the power cord into the wall outlet securely. Press the [TV/AV/DVD] button to change input mode. [. . . ]