User manual DAEWOO DF-4100

[. . . ] DVD Recorder + VCR DF-4100/4150/8100/8150 User Manual Safety Instructions INTRODUCTION Please keep the DVD Recorder+VCR's guarantee sheet and receipt in a safe place. Precautions · Read this booklet carefully. · Make sure the rating of your household electricity supply matches that shown on the back of your DVD Recorder+VCR. · Read this page and chapter `Setting up your DVD Recorder+VCR' to help you set up and adjust your product correctly. · Do not put the DVD Recorder+VCR in a hot or humid place. [. . . ] 5 'READING' appears on the front panel display, and playback starts automatically. If playback does not start, press [PLAY ()]. In some cases, the Disc menu might appear instead. Chapter Shows the current chapter number and total number of chapters, and skips to the desired chapter number. The on-screen display appears on the TV screen. 2 Use [. . . ] to select the `Chapter` icon on the on-screen display. Press [ENTER] to confirm. Playing a DVD+R (+RW) When a DVD+RW or unfinalized DVD+R is inserted, no title is played automatically but the current TV channel displays on the screen. If you want to play a title on the DVD+R (+RW), you must press [MENU] or [PLAY] to display the disc menu. Select a title to play then press [ENTER]. If a Disc menu is displayed · A Disc menu may be displayed when you load a DVD. Use the [oe . . . ] buttons to select the title/chapter you want to view, then press [ENTER] to start playback. Press [TITLE] or [MENU] to return to the Disc menu. · If the Parental Level feature is set and the disc is below the current Parental Level setting, the 4-digit code must be entered and/or the disc must be authorized; see `Set Parental Level` on page 29. · The DVD Recorder+VCR will not play discs with Region codes different from the DVD Recorder+VCR. The Region code for this DVD Recorder+VCR is 2 (two). · Unless stated otherwise, all operations described below use the remote control. Some features may also be available in the Setup menu. · A disc which is recorded by computer at high speeds (greater than or equal to 2x) may not be recognized. · A disc which is recorded with unauthorized movie material may not be played. · A disc which is recorded by other recorder or not recorded correctly may not be recognized or played. Angle Shows the current angle number and total number of angles, and changes the angle number. The on-screen display appears on the TV screen. 2 Use [. . . ] to select the `Angle` icon on the on-screen display. Press [ENTER] to confirm. PLAYBACK Audio Shows the current audio soundtrack language, encoding method, and channel number, and changes the setting. [. . . ] DVD Recorder+VCR A/V Out jacks are not connected to TV A/V In jacks. Solution No solution. Select the channel on the DVD Recorder+VCR's built-in TV tuner. No solution. Cannot record or did not record successfully. Recording Video recording format Timer Recording not possible. Audio recording format Sampling frequency Compression format Sampling frequency Compression format Head system Timer Tape speed Tape width Rewind time Antenna Channel coverage Frequency range Video S/N Audio S/N Resolution VCR Specifications Stereo Audio Record and/or Playback not present. Remote control does not work properly. Make A/V connections. Stereo is available only via A/V output from DVD Recorder+VCR. [. . . ]