User manual DAEWOO DF-7150D

[. . . ] DVD Recorder + VCR DF-7150D User Manual P/N : 97P95600D0-7N Safety Instructions INTRODUCTION Please keep the DVD Recorder+VCR's guarantee sheet and receipt in a safe place. Precautions · Read this booklet carefully. · Make sure the rating of your household electricity supply matches that shown on the back of your DVD Recorder+VCR. · Read this page and chapter `Setting up your DVD Recorder+VCR' to help you set up and adjust your product correctly. · Do not put the DVD Recorder+VCR in a hot or humid place. [. . . ] · When an external input is selected, the audio channel can be switched only to Stereo. 32 33 On-Screen Display Overview DVD Playback Playing a DVD 1 Press [DVD] to set the remote control to operate the DVD deck. Turn the TV on and select the video input source connected to the DVD Recorder+VCR. Audio system: Turn the audio system on and select the input source connected to the DVD Recorder+VCR. OSD Menu Options for DVD During DVD playback, press [DISPLAY] to show information about the current disc. While the disc information is displayed, press [DISPLAY] again to show the disc remaining time. Title Shows the current title number and total number of titles, and skips to the desired title number. The on-screen display appears on the TV screen. 2 Use [. . . ] to select the `Title` icon on the on-screen display. Press [ENTER] to confirm. 2 Press [OPEN/CLOSE] to open the disc tray. 3 Load your disc in the tray with the playback side down (label side up). 5 'READING' appears on the front panel display, and playback starts automatically. If playback does not start, press [PLAY ()]. In some cases, the Disc menu might appear instead. Chapter Shows the current chapter number and total number of chapters, and skips to the desired chapter number. The on-screen display appears on the TV screen. 2 Use [. . . ] to select the `Chapter` icon on the on-screen display. Press [ENTER] to confirm. Playing a DVD+R (+RW) When a DVD+RW or unfinalized DVD+R is inserted, no title is played automatically but the current TV channel displays on the screen. If you want to play a title on the DVD+R (+RW), you must press [MENU] or [PLAY] to display the disc menu. Select a title to play then press [ENTER]. If a Disc menu is displayed · A Disc menu may be displayed when you load a DVD. Use the [oe . . . ] buttons to select the title/chapter you want to view, then press [ENTER] to start playback. Press [TITLE] or [MENU] to return to the Disc menu. · If the Parental Level feature is set and the disc is below the current Parental Level setting, the 4-digit code must be entered and/or the disc must be authorized; see `Set Parental Level` on page 29. · The DVD Recorder+VCR will not play discs with Region codes different from the DVD Recorder+VCR. The Region code for this DVD Recorder+VCR is 2 (two). [. . . ] Stereo is available only via A/V output from DVD Recorder+VCR. DVD Recorder+VCR Audio/Video Out is Select AUX or A/V source as TV input. See `Changing the TV Audio Channel` on DVD Recorder+VCR's TV audio page 33. Point the remote control at the remote The remote control is not pointed at sensor of the DVD Recorder+VCR. [. . . ]