User manual DAEWOO DPB-280LH

[. . . ] TIMER ON/OFF Button Press to set the unit off or on time. (0. 5, 1, 1. 5, 2, 2. 5, 3, 4, 5, 6, 8, 10, 12, 16, 20, 24hr) TIMER ENTER/CANCEL Button Press to enter a timer setting or to cancel timer setting MODE FAN SPEED FAN DIR. FAN DIR. Button Press to select up/down direction for fan. Button Press to select left/right direction for fan. [. . . ] SET DISIRED TEMPERATURE (22°C) BY USING TEMPERATURE BUTTON If room temperature reach desired remperature, the unit repeats cool and fan mode automatically to keep desired temperature. 7 METHOD BY USING REMOTE CONTROLLER 1. SELECT OPERATION MODE BY PRESSING MODE BUTTON AUTO 2. SET DESIRED TEMPERATURE(22°C) BY USING TEMPERATURE BUTTON AUTO If room temperature reach desired temperature, the unit repeats cool and fan mode automatically to keep desired temperature. TO SELECT THE FAN SPEED METHOD BY USING MAIN CONTROL 1. FAN SPEED FOLLOWS BY PRESSING FAN SPEED BUTTON · AUTO MODE : AUTO -> LOW -> MIDDLE -> HIGH -> NATURAL · QUICK MODE : HIGH · COOL MODE : AUTO -> LOW -> MIDDLE -> HIGH -> NATURAL · FAN MODE : LOW -> MIDDLE -> HIGH -> NATURAL · DEHUMIDIFIER MODE : AUTO · HEAT MODE : AUTO -> LOW -> MIDDLE -> HIGH -> NATURAL NOTES: If you select "auto fan speed" on auto, cool, dehumidifier and heat mode, fan speed will change automatically according to the temperature. · If "natural" fan speed is selected, led display of fan speed changes low -> high -> low -> high. But, on dehumidifier mode, the fan speed is fixed to "auto fan speed" to improve dehumidifying efficiency. METHOD BY USING REMOTE CONTROLLER 1. Press "fan speed" button of remote controller, the functions are the same as the methods by using main control. 8 TO SELECT THE FAN DIRECTION - Remote controller is only available. 1. Press fan direction button to select fan direction · Press desired fan direction button, "UP · DOWN" or "LEFT · RIGHT" control louver moves, press again to stop FAN DIR. 2. "UP · DOWN" Up · down louver moves "LEFT · RIGHT" Left · right louver moves FAN DIR. 3. "UP · DOWN, LEFT · RIGHT" · Up · down, left · right louver move together NOTES: Do not touch or try to adjust louver by force when the louvers move automatically. and you want the unit to turn on at 4:00 P. M. , select 3 hours. Place the remote controller so it is facing the unit. When the desired hour is reached, the unit will turn on to the selected mode. 4. Press the ENTER button to input the setting into memory; the unit will beep, the TIMER indicator will light on the unit and the TIMER indicator on the remote will light to indicate the unit is in the timer mode. NOTE : Press the ENTER button within 5 seconds of selecting the desired time. If mote than 5 seconds elapse, steps 3 and 4 must be repeated. TO SET SLEEP MODE - Press sleep mode button while air conditioner is on 1. · Press the sleep mode button, 4 indicator appears in the display. The unit will turn off after 4 hours from now · You can select fan direction · You can select auto, low, middle, high, natural of fan speed(at first fan speed is low) AUTO NOTES: To set sleep mode is not available on fan mode and quick mode 10 TO SET THE FUNCTION MODE AUTO MODE METHOD BY USING MAIN CONTROL 1. SELECT AUTO MODE BY PRESSING MODE BUTTON · AUTO -> QUICK -> COOL -> FAN -> DEHUMIDIFIER -> HEAT is sequently selected by pressing "MODE" button · Desired temperature is available from 24°C to 28°C METHOD BY USING REMOTE CONTROLLER 1. SELECT AUTO MODE BY PRESSING MODE BUTTON "Auto mode" operation gives you the most comfortable airs by adjusting temperature, humidity and fan speed automatically according to the room conditions. AUTO NOTES: If it is necessary, select fan speed or fan direction QUICK MODE METHOD BY USING MAIN CONTROL 1. SELECT QUICK MODE BY PRESSING MODE BUTTON Cooling: room temperature is low METHOD BY USING REMOTE CONTROLLER 1. SELECT QUICK MODE BY PRESSING MODE BUTTON "Quick mode" operation allows you to make the room cool(or warm) quickly according to the room conditions Heating: room temperature is high NOTES: If it is necessary, select fan direction · Fan speed and temperature control is not available because fan speed and temperature is set automatically on quick mode 11 COOL MODE MOTHOD BY USING MAIN CONTROL 1. SELECT COOL MODE BY PRESSING MODE BUTTON Desired temperature is available from 18°C to 32°C To make room cool and comfortable, adjust desired room temperature by using temperature button. METHOD BY USING REMOTE CONTROLLER 1. [. . . ] There is an obstacle in front of intake or indoor unit. The temperature has been set improperly. Wait 3 minutes for the unit to operate. Clean or replace filter(s). When locating unit for the first time, make sure it is in a desirable location. Check and reset if necessary This is normal. Strange sounds occur. During operation, especially after turning it on or off, refrigerant flows inside the unit. [. . . ]