User manual DAEWOO DQD-2000 [EUROPE]

[. . . ] SAFETY INFORMATION NOTE: This player can be used only where the power supply is AC 220-240V, 50Hz. CAUTION: DVD/VIDEO CD/CD PLAYER IS A CLASS 1 LASER PRODUCT. HOWEVER THIS DVD/VIDEO CD PLAYER USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE DVD/VIDEO CD/CD PLAYER CORRECTLY AS INSTRUCTED. [. . . ] Press the "Menu" button to see the menu. MENU 1 AUDIO 2 SUB PICTURE 3 ANGLE MENU 1 LOVE STORY 2 RAMBO MENU 1 PLAY 2 ETC * Above menu is just an example, usually it includes various graphics and different menu for each disc. * "Audio", "Subtitle", "Angle", "Title" and "Play" is available on a normal menu screen. 2 Move to a desired position using the "List Move" button, then press the "Enter" button. MENU 1 AUDIO 2 SUB PICTURE 3 ANGLE When selecting the Audio MENU 1 KOREAN 2 ENGLISH 3 JAPANESE When selecting the Subtitle MENU 1 KOREAN 2 ENGLISH 3 JAPANESE When selecting the Angle MENU 1 CENTER 2 LEFT 3 RIGHT 3 Move to a desired position using the "List Move" button, then press the "Enter" button. *On the above example, the spoken language is set to Korean, subtitle to English, and Angle to Center. Press the Menu button one more time to remove the menu screen. 4 16 WHAT IS VCD? * Unlike normal CD, both sound and image are recorded on VCD. * 74 minutes of image and sound are recorded on a Video-CD. * Image is compressed as MPEG-I type which has similar quality with a VHS tape, and the sound quality is the same as the CD. * The image and the sound is divided by track. DVD SECTION TO PLAY A VCD * Turn on the TV and the Audio component by pressing the Power button. * Some menu may not be available depending on the disc. 1. VCD PLAYING INSTRUCTION 1 Select "Video" mode by pressing the TV/Video button of TV. *Some TV may show "outside" input. 2 Select "AUX" or "CD" on the function selection on the audio component. *It may be different for some audio component, refer to the user manual of the audio component. 3 Press the Open/Close button after pressing the Power button. VFD indicator will show "-ON-" on pressing the Power button, it will show "Open" on pressing the Open/Close button. It will start to play. 17 TO PLAY A VCD _CONTINUED To stop the play temporarily Press the Pause button. * The picture will stop and the sound will stop. * To play again press play button or pause button once again. To stop the play Press the Stop button. * This product has a Resume Stop function which makes the DVD player Resume Play on the point where it stopped by pressing the play button. * When the Resume Stop and Resume Play function is not needed, press the Stop button twice. To pull out the disc Press the Open/Close button. The disc tray will open. PBC(PLAYBACK CONTROL) FUNCTION The function is available only on Video-CD with version above 2. 0. [. . . ] [For DVD] [For VCD or CD] TC **-** **-** **-** **-** TC **-** **-** **-** **-** TC **-** **-** **-** **-** TC **-** **-** **-** **-** PROGRAM EDIT 1** 5** 9** 2** 6** 10** 3** 7** 11** 4** 8** 12** 1-_ 13** 14** 15** 16** <BACK> <0K> <CLEAR> <BACK> <0K> <CLEAR> 2 Use the List Move button and number button to set the play order. * The play order is "most left top to bottom, then second most left top to bottom and on". * The wrong input of the play order or if you desire change the order can be fixed using the Cancel button, or select <Clear> and press input button using the List Move button to erase the whole program. Select "OK" and press Input button after setting the play order to Program play. [. . . ]