User manual DAEWOO DRC6200N

[. . . ] DVD/VCR User's Guide Changing Entertainment. Cover 1 7/28/03, 9:30 AM Important Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only identical replacement parts. This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product. WARNING To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. No objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION FCC Regulations state that unauthorized changes or modifications to this equipment may void the user's authority to operate it. Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert. [. . . ] · To change the REPEAT mode, press the right arrow button to highlight the current REPEAT mode, and then press OK to toggle the available modes. · To return to the folder and files lists at the top of the screen, press the left arrow button. Select a file using the arrow buttons, then press PLAY to start playback. MP3 ONLY TRACK OK MENU 24 DRC6200N. 03 Playing Discs 24 7/28/03, 9:31 AM Chapter 3 Playing Discs · mp3 or WMA file: the player begins by playing the selected file, then all the files and subfolders contained in the same folder. The player then plays the contents of the folders at the same level as the folder containing the file selected at the start. Note: While listening you can use the or buttons to go back to the previous track or go on to the next one and press the MENU button to display the disc's contents. · JPEG file: the player starts the slide show with the JPEG file you have selected and proceeds to display all the JPEG files in the same folder, then all the JPEG files in the subfolders located in the same folder. Note: During the slide show you can use the ZOOM button to magnify the picture, the or buttons to go back to the previous picture or go on to the next one and the MENU button to interrupt the slide show and display the disc's contents. 5. Press the INFO button to display the Info menu during playback. · mp3 file: press the PLAY MODE repeatedly to select a playback mode (standard, random, repeat). When the player has played all the files the music or slide show stops and the disc's contents appear. Press STOP to end playback. Chapter 3 DRC6200N. 03 Playing Discs 25 7/28/03, 9:31 AM 25 Chapter 4: VCR Features VCR Basics Once your initial settings are complete, you can begin using your DVD/VCR. In order to begin, you must first understand some basic concepts. Playing a tape 1. Tune the TV to your DVD/VCR viewing channel (03, 04, or the Video Input Channel). · Press FORWARD or REVERSE to cue the tape to the desired position during Play mode. · To advance the tape 30 seconds at a time during Play mode, press the SEARCH button on the remote control (each time you press SEARCH, 30 seconds is added to the amount of tape that is scanned -- up to 5 minutes). · Press PLAY (if necessary) to begin tape play. For slow-motion playback, press FORWARD and/or REVERSE (while picture is paused). To move one frame at a time, press FORWARD on the remote (while paused). · Press CHANNEL +/- (or CH +/- on the remote) to remove any streaks from the picture, if necessary. · Press STOP to stop playback. Automatic Rewind The DVD/VCR automatically rewinds the tape if it reaches the end of the tape during playback. While rewinding, you can press the ON·OFF button (the DVD/VCR will turn off after it rewinds the tape). If the tape has no safety tab, it will be ejected. Tape Eject Press the EJECT button on the DVD/VCR when stopped to eject the tape. You can also press and hold the OPEN·CLOSE button on the remote control for three seconds. Basic Recording 1. Set the tape speed by pressing the SPEED button on the remote control. Press the RECORD button to begin recording. [. . . ] · Consult the Owner's Manual that came with your TV. · If you can't find the information in the manual, or can't find the manual, review the following list of ways to access Video Input Channels on TVs. · There might be a button on the TV's remote control that accesses the Video Input Channel (see table below for examples). · You might select the Video Input Channel from the TV's menu system. [. . . ]