User manual DAEWOO DSB-181L

[. . . ] OWNER'S MANUAL SPLIT AIRCONDITIONING SYSTEM MODEL #: DSB-181L/181LH S1 SAFETY INSTRUCTIONS PLEASE READ THE FOLLOWING SAFETY INSTRUCTIONS BEFORE INSTALLING AND OPERATING THE UNIT: This air conditioner meets strict safety and operating standards. The installer of this unit must install or service this unit so it operates safely and efficiently. Precautions When Wiring: · Do not plug in the unit until all connections (tubing, drain hose, mounting, etc. ) have been made and double-checked. · High voltages are present in this unit and are very dangerous. Please refer to these instructions and diagrams when wiring. [. . . ] The desired temperature can be changed up to 32°C and down to 18°C. 4. To select the fan speed, press the FAN SPEED button until the desired speed appears in the display (see below). FAN SPEEDS AUTO "AUTO" "" "" "" "NATURAL" The fan will automatically select the fan speed. The fan will randomly cycle through the speeds simulating a cool breeze. 11 TO SET FAN ONLY MODE To operate only the fan so the unit will circulate the air, proceed as follows: 1. Press the ON/OFF button on the remote control to turn the unit on; the On LED will light on the indoor unit and "ON" will light in the remote display. Press the MODE button until the Fan indicator appears in the display. To select a fan speed, press the FAN SPEED button until the desired speed appears in the display (see below). FAN SPEEDS "" "" "" "NATURAL" The fan will operate on low speed. The fan will randomly cycle through the speeds simulating a breeze. NOTE: · If "NATURAL" is selected, the NATURAL" indicator on the indoor unit will light. TO SET DEHUMIDIFIER MODE Select this mode when there is high humidity. Press the ON/OFF button on the remote control to turn the unit on; the On LED will light on the indoor unit and "ON" will light in the remote display. Press the MODE button until the Dehumidifier indicator appears in the display. 3. or buttons, set the desired temperature. The desired temperature can be changed up to 32°C and down to 18°C. 12 TO SET UNIT TO HEAT MODE (DSB-181LH ONLY) To set the unit to heat the room to a desired temperature, follow the procedures below: 1. Press the ON/OFF button on the remote control to turn the unit on; the On LED will light on the indoor unit and "ON" will light in the remote display. Press the MODE button until the Heat indicator appears in the display. In the heat mode, the fan direction (UP, DOWN) is further downward than that in the cool mode for the good circulation. To select the fan speed, press the FAN SPEED button until the desired speed appears in the display (see below). 3. or buttons, set the desired temperature. The desired temperature can be changed up to 32°C and down to 18°C. NOTE: When the heating orperation is started, hot air delivery might be delayed due to warm up period. FAN SPEEDS The fan will automatically select the fan speed. "" The fan will operate on low speed. "" The fan will operate on medium speed. "" The fan will operate on high speed. "NATURAL" The fan will randomly cycle through the speeds simulating a cool breeze. "AUTO" TO SELECT THE FAN DIRECTION Regardless of the mode the unit is set for, the fan direction can be changed so it moves up and down, left and right or both. [. . . ] This is a shock hazard and the unit can be damaged. Clean the casing and front of the indoor unit with a vacuum brush or wipe with a clean damp cloth. · NEVER USE Solvents, harsh chemicals or hot water to clean the unit. · Some metal edges on the unit are sharp. · Internal parts in the outdoor unit may need cleaning or routine maintenance from time to time. [. . . ]