User manual DAEWOO DSI-9200

[. . . ] Digital Satellite Receiver & VCR Combo Instruction manual Model: DSI-9300/ DSI-9400 DSI-9100/ DSI-9200 P/N: 97P95600D0-1C PRECAUTIONS AND SAFETY Precautions · Read this booklet carefully. · Make sure the rating of your household electricity supply matches that shown on the back of the VCR receiver. · Read this page to help you set up and adjust your VCR receiver. · Do not put the VCR receiver in a hot or humid place (to avoid the risk of fire and electric shock). [. . . ] And "send command" will move the antenna to the correct position. You don't have to save the 20 Video Recorder+Satellite Receiver Video Recorder+Satellite Receiver 21 5 SYSTEM SETTING You can make misc settings on System Setting menu. "Start on channel" Feature allows you to setup the first shown channel when you power on the satellite receiver. TUNING IN NEW STATIONS 6 Play PLAYING CASSETTES 1 Push the cassette smoothly and squarely into the cassette bay, with its windows pointing up. Optional : If your set has RF Output, you may show 2 additional menus related to RF channel selection. Default UHF channel is 40. 2 Press [PLAY/PAUSE] to start playback. 4 Press [FF] or [REW] to fast forward or rewind the cassette from stop. 5 Press [STOP/EJECT] to eject the cassette in Stop mode. · When you load a protected cassette such as pre-recorded film playback will start automatically. · When you are playing tapes of poor quality or tapes which have been recorded on another machine, you can use the [PR+] or [PR-] buttons while the cassette is playing to reduce horizontal interferences stripes. · Playing NTSC tapes on PAL TV: If you play cassettes which have been recorded on the NTSC colour system (as used in the USA), you can watch the pictures on most PAL TVs. On older TVs, some black lines may appear at the top and bottom of the screen. To prevent these problems adjust the VHOLD knob on your television. NTSC : National Television Systems Committee. Still 1 Press [PLAY/PAUSE] in Playback mode to still picture from playback. 2 Press [PLAY/PAUSE] to switch back to normal playback. · After approximately five minutes on still, the cassette will automatically switch to normal playback. 22 Video Recorder+Satellite Receiver Video Recorder+Satellite Receiver 23 6 Variable picture search PLAYING CASSETTES 7 RECORDING CASSETTES Timer recording using EPG The Digital satellite receiver provides an automatic system which makes it easier to set the timer recording. EPG are shown in TV or Radio programme guides. 1 Keep pressing [FF] to vary the forward search speed. 2 Keep pressing [REW] to vary the rewind search speed. Pressing the above buttons will vary the search speed in two speeds. 1 Insert an appropriate tape and position it correctly, ready for recording. Press the [EPG] button and the EPG menu will appear. 3 Press [PLAY] to switch back to normal playback. Variable slow motion 2 Press the [GREEN] button to show VCR record Timer set. 1 Starting from playback you can keep pressing [SLOW-] or [SLOW+] to control slow motion speed in six steps. 3 Press the [OK] or [RED] button to enter the Edit Entry. The Channel, Date, Start and Stop time will then be filled in for the programme you have chosen. 2 Press [PLAY] to switch back to normal playback. Finding new recordings (index scan) The video index search system allows you to find the beginning of any recording you have made on your video. Your video automatically records index marks on the tape whenever a recording is started. 4 If you wish to change any of the settings: · Move the select bar to the setting you want to change using the [. . . ] or [] buttons. · Change the setting using the [oe] or [] buttons, or the number buttons [0] to [9]. (For detailed descriptions of all the settings and how they can be changed, please see the Normal timer recording section. ) 1 Press [INDEX +] or [INDEX ­] to search forwards or backwards. The video will now wind to the beginning of a recording, play it for about 6 seconds, then wind on to the next one. 5 When all the settings are correct, select the [OK] button. If you insert invalid data, you will see message box. 2 When you see the recording you want to watch, press [PLAY]. CM skip (commercial skip) 6 The Timer List screen will then be shown with your new timer highlighted. 1 If you press [30] on the remote control during playback mode, tape advances for 30 seconds segment. 7 Press the [ ] button to put your video into standby. Your video will not record unless you do this. You can switch the video on again if you want to set the timer to record another programme. [. . . ] SLOW The tape is playing and in slow-motion mode. IND+ The tape is searching forwards for the next recording. IND- The tape is searching backwards for the previous recording. 36 Video Recorder+Satellite Receiver Video Recorder+Satellite Receiver 37 12 TROUBLE SHOOTING PROBLEM POSSIBLE CAUSES The Digital Satellite Receiver is in stand-by mode. The satellite dish is not pointing at the satellite. 12 WHAT TO DO PROBLEM There are interferences on your digital satellite channels, caused by an existing terrestrial channel or video signal. TROUBLE SHOOTING POSSIBLE CAUSES The system is connected by RF leads and the output channel of the Digital Satellite Receiver is interfered with an existing terrestrial channels or video signal. [. . . ]