User manual DAEWOO DSJ-6000LN

[. . . ] D I G I T A L INSTRUCTION MANUAL Special Features LCD Rear Projection Television DSJ-6000LN W ide screen with the highest picture quality!Experience the reality and feel the amazing sensation!Perfection of the finest digital technology-DAEWOO LCD engine. ·Reality and sensation experienced only in theaters! Small crystal liquid particles compounding the wide screen LCD Projection Television provides a clear image and higher quality of picture! ·Wide Screen! [. . . ] Follow the instructions on the screen to set up. When the setting is done, press the "menu" button to close the window. The menu window will automatically disappear if not closed after an approximate time of 8 seconds The window below the main menu where states "move, previous, next, select" changes its color, and helps to recognize currently selected menu. Its sub-items are Brightness, Contrast, Sharpness, Color, and Tint. Its sub-items are Screen Size, Screen Mode, and Adjustment (PC/DTV) Its sub-items are Sound Mode, Equalizer, Dolby Pro Logic, Sound Balance, Dolby Sound, and External set. Its sub-items are Input, TV/CATV, Auto Search, Channel Selection, and Fine Tune. Its sub-items are Language, Time setting, Factory set, Resolution (PC/DTV), Lamp Time, and parental set(TV/VIDEO). -32- To watching Television Turning on the TV Buttons on the TV set have the same functions as those of the remote controller. Turning on the TV set. Plug the power cord to the outlet and press the main power at the front controller panel. A red lamp will light up. Operating the TV set. Press the power button on the remote controller or on the TV set. When the main power lamp flickers on green, the screen will gradually turn on. POWER During this instance, the power button will not operate. When the process is completed, the main power lamp lights on green TV REMOTE CONTROLLER It is LCD-Projection TV characteristics that it takes a little while for the video to be displayed on the screen when it is turned on. This is not malfunctioning; thus, please be patient and wait for a moment. The degree of brightness will decrease insignificantly after 3 minutes is passed. This is not a breakdown; it is only using a power saving process to maximize the lamp's lifetime. When the power buttons are pressed, the main power lamp may flicker in green, but the secondary power lamp may flicker in red and orange alternately. In this case, the TV's main power has been erroneously pressed, or has been turned off improperly by a power stoppage or by any other reason. However, please wait for an instant, and the TV will be back on (the latest 1min. 30sec. ) since this is not a malfunctioning of the product. -33- Timer On/Off and the main power lamp flickering in red: Please check whether the air filter and lamp cover is properly fixed and adjusted. Timer On/Off and the main power lamp flickering in red and orange alternately: There must be a problem with the lamp. You may have to change the optical lamp or call for service. (For the lamp exchange, please refer to page 12 of the manual) Timer On/Off and the main power lamp flickering in orange: There must be a problem in the cooling fan. The main power lamp flickering in orange: The product is overheated and its temperature is extremely high for some reason. Please check if the slots and openings of front and rear panels are blocked impeding its ventilation or if the filter is full of dust and needs some cleaning. After checking them, press the power button on the remote controller or the one on the TV set to turn on the TV and operate again. Turning off the TV The lamp's lifetime may be reduced if the TV set is not turned off properly. [. . . ] Please check the power cord and connect it properly to the outlet. Press the main power button at the front controller panel. Has the "mute" button at the remote controller been pressed accidentally?Press the "mute" button on the remote controller once more. Adjust the volume pressing the "right" button Have you checked the Color? [. . . ]