User manual DAEWOO DSL-20D1T

[. . . ] DSL20D1T(PAL)·º¿ GB 03. 10. 23 1:47 PM `1 mac001 1200DPI 90LPI 20" LCD Television MODEL NO : DSL-20D1T Instruction Manual ENG GBISH L PAL-I, II, PAL/SECAM-B/G, D/K, SECAM-L/L'/NTSC-AV A2 / NICAM STEREO SOUND TELETEXT SCART / VIDEO / S-VIDEO / COMPONENT MULTI-LANGUAGE OSD Ver. 032302 DSL20D1T(PAL)·º¿ GB 03. 10. 23 1:47 PM ` ii mac001 1200DPI 90LPI SPECIAL NOTE FOR USERS IN GREAT BRITAIN The appliance is supplied with a moulded three pin mains plug fitted with a 5 Amp fuse. Should the fuse require replacement, it must be replaced with a fuse rated at 5 Amp and approved by ASTA or BSI to BS1362. The plug contains a removable fuse cover that must be refitted when the fuse is replaced. [. . . ] Use the / buttons to select the desired character : A B C . . . Z + - . (blank) 1 2 . . . 9 COLOUR STANDARD SELECTION If necessary, you can change the Colour standard. 1. Use the / buttons to select the desired Colour standard : PAL SECAM 11 ENGLISH ?? DSL20D1T(PAL)·º¿ GB DAILY USE Switching On and Off 03. 10. 23 1:48 PM SWITCHING OFF 1. Press the POWER button to return the set to its stand-by mode. Press the MAIN POWER switch to turn the TV set off completely. The set will switch to stand-by mode and then the Indicator will illuminate in Red. Press the POWER button, / button or NUMBER button. 1. If the Indicator is not lit, then the TV set is powered off. You must press the MAIN POWER switch on the TV set. SWITCHING ON ` 12 The TV set will be switched on and then the Indicator change to Green. mac001 1200DPI 90LPI Picture Control Programme Selection Picture Brightness 50 h?? Note : Features Colour 30 h?@ If you don't use the set for extended periods of time, turn it off with MAIN POWER switch. Tint 0 h?@ Status PR 12 NICAM ----Stereo The STATUS button is used to display the current status; TV/AV mode, Programme number, Channel Name, Sound mode. Select Adjust Exit You can also select a programme by pressing step by step the / buttons. The NUMBER buttons are used for direct programme selection. To select a two-digit programme, press the second numbered button within 2 seconds. DIRECT SELECTION The set has 100 programme numbers, PR00. . PR99. / SELECTION SMART PICTURE SELECTION When you press the PICTURE( )button repeatedly, you can call up four pictures settings; Normal Bright Dark Favourite Normal ?Select and adjust the level of each function: "Brightness", "Contrast", "Colour", "Sharpness". "Tint" is displayed only when receiving a NTSC signal. The adjusted levels are stored automatically in Favourite mode. BRIGHTNESS, CONTRAST, SHARPNESS, TINT CONTROL DAILY USE COLOUR, 13 DSL20D1T(PAL)·º¿ GB 03. 10. 23 1:48 PM ` 14 mac001 1200DPI 90LPI DAILY USE DAILY USE Sound Control VOLUME CONTROL Volume Adjust the volume with the h?@ h?@ h?@ h?@ h?@ h?@ e?@ h?@ h?@ h?@ h?@ h?@ h?@ / buttons. 30 e MUTE Pressing the MUTE button turns the sound off. The sound returns if the button is pressed once more. Treble - Use this to adjust the high tone. Balance - Use this to adjust sound balance between the left and right speakers. Spatial - If you select "Yes", the Spatial sound effect is available. [. . . ] · Make sure the brightness and contrast are not set to minimum. · Make sure the Colour is not set to minimum. · Check the Colour standard settings. · Adjust the Brightness, Contrast. [. . . ]