User manual DAEWOO DSL-20D4 annexe 2

[. . . ] GB LCD TELEVISION INSTRUCTION MANUAL DSL-15D3 DSL-17D3 DSL-20D3 DSL-15D4 DSL-17D4 DSL-20D4 PAL B/G, D/K, I/I, SECAM B/G, D/K, L/L', NTSC(AV) TELETEXT SCART/VIDEO/S-VIDEO/COMPONENT/PC MULTI-LANGUAGE OSD Caution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance. WARNING:To reduce the risk of fire or electric shock hazard, do not expose this appliance to rain or moisture. 2 Safety Precautions 1. CLEANING Unplug this TV equipment from the AC power outlet before cleaning. [. . . ] By pressing the PR button, you can find the desired number or character. For saving the channel you select, please memorize it. NOTE: Tint is displayed only when receiving a NTSC signal. Only Brightness, Sharpness and Contrast are displayed in PC mode. SMART NORMAL SELECTION When you press the NORMAL button repeatedly, you can call up three pictures settings; Normal1 Normal2 Favourite Normal1 ZOOM (ASPECT RATIO) CONTROL You can select the desired aspect ratio with the ASPECT button on the remote controller. (NB: It doesn't work in Component or PC mode. ) The following picture formats are available: Normal 16:9 Zoom (15"/20") Normal 4:3 Zoom (17") Picture Sound Utilities Setup Brightness Contrast Colour Sharpness 32 32 32 32 Move Adjust MENU Prev. 19 Daily Use Sound Control VOLUME CONTROL Adjust the volume with the VOL buttons. Volume 20 MUTE Pressing the MUTE button ( ) turns the sound off. The sound returns if the button is pressed once more. SOUND MODE Stereo/Mono sound selection When receiving a Stereo programme, Stereo mode is automatically selected. In Stereo reception if you are unable to get good sound quality due to poor reception, you can force a change from Stereo to Mono transmission by pressing the S. MODE button. Then the program status display indicates (Mono). The setting can be individually selected for each PR number. Pr 12 Stereo Pr 12 Mono 20 Daily Use Special Features Select the Utilities menu. CHILD LOCK The set is child-locked by selecting "On". This prevents the use of the TV set without the remote control. NOTE : When a Child lock is activated, the LED will be blinking the red and green in Stand-By mode. OSD BACKGROUND If you select Translucent, the OSD (On-Screen Display) back-ground appears translucent. If you select Opaque, the OSD back-ground appears opaque. COLOUR TEMPERATURE CONTROL You can change the tone of colour. Normal: Warm : Cool: Normal white Reddish white Bluish white Picture Sound Utilities Setup Language Time Osd Translucent Opaque Colour temp Child lock Normal Off English Move Adjust MENU Prev. Time setting 1. Press the VOL button while the selection bar is on Time. Using PR and VOL buttons input the current time. NOTE : Even though you turn off LCD unit with remote control, the time setting will be saved. However, if you turn off the main power off from the LCD unit the time setting will be reset. [. . . ] · Replace the batteries in the remote controller. 9 · Make sure the Remote sensor window is not understrong light e. g. · Has the Child lock been switched on?· Check that the TV set is switched on at the main switch. [. . . ]