User manual DAEWOO DTB-2132

[. . . ] You must turn the external equipment off or press the TV/AV button to return to the TV mode. 3 RCA JACK AV (FRONT) Connect the AV (Audio/Video) socket with an appropriate cable to the corresponding socket of the external equipment. Select AV mode by pressing the TV/AV( Press the TV/AV( the TV mode. ) button to return to NOTE: If two apparatus are connected, one to the front AV Jack and the other to the rear SCART Jack, you can play only one apparatus. one of the them must be switched off. HEADPHONE JACK Insert the headphone plug(3, 5mm) into the headphone socket. [. . . ] - Note that if you turn off the set with the MAIN POWER button, the clock setting is lost and must be reset if necessary. - The TV set turns on at the time and with the programme chosen by the customer. This function is only available when clock is set and when TV set is switched to stand -by mode. - Switch "wake up" function ON/OFF with remote control CURSOR LEFT or RIGHT button. - Enter wake up time with remote control 0. . . 9 NUMBER buttons. WAKE PR Select TV turn-on programme number. FEATURES LANGUAGE CHILD LOCK CLOCK WAKE TIME WAKE PR ENG OFF -- : -OFF 01 9 INSTALL MENU AUTO SETUP Automatic search system. STORE TO Programme storage number. INSTALL AUTO SETUP EDIT FREQ NAME PROGRAM STORE TO 211. 25 ----01 01 EDIT MENU PR Programme number. Skip : programme skipped. EDIT PR 04 03 02 01 00 99 98 NAME ----------------------------SKIP 10 AUTO SETUP Select "AUTO SETUP" and Press remote control "NORMAL/OK" button more than 3 seconds to start automatic searching. PROGRAMME LIST EDITION Select "EDIT" function and confirm with the remote control "NORMAL/OK" button : Edit menu appears and shows existing recorded programmes. The recorded programmes can be modified as follows : Channel skipping You can select skip "YES" or "NO" using the remote control SKIP button . A programme with skip " " doesn't appear on screen when changing programmes with PR UP/ DOWN buttons. Channel deleting Select the programme to delete using remote control CURSOR UP/ DOWN buttons. Press the remote control DELETE button . The deleted programme is moved to the programme number 99 with skip " ". The existing 99 programme is moved to programme number 98 and so on. 11 MANUAL CHANNEL SETTINGS Choose starting point Select with "PROGRAM" function the programme from which you want to start manual tuning. Then, the channel number, the frequency, the name and the programme number of this programme are displayed in the install menu. Channel searching Select "FREQ. " function. Press the remote the remote control CURSOR RIGHT / LEFT buttons for more than 3 seconds to start (up / down) manual tuning. After searching, tuning will stop automatically to the next channel. (To stop searching press the remote control MENU button) 12 Fine Tuning If you are unable to get a good picture or sound because of a poor broadcasting signal, it is possible to fine tune a signal. Select channel frequency ("FREQ. ") function. Press and release the remote control CURSOR RIGHT/LEFT buttons to fine tune a signal. Enter station name Select "NAME" function. Use the CURSOR RIGHT/LEFT buttons to select the character (letter) you want to modify. To modify this letter press the CURSOR UP/DOWN buttons until the desired letter is displayed. [. . . ] · Check the Colour control is set to the minimum position. · Check the Antenna Cable is broken or disconnected or damaged. · It may be affected by interfering signal. from nearby amateur radio transmitter or another TV set. ) · The interference can be reduced to some extent by adjusting the direction or height of the antenna. [. . . ]