User manual DAEWOO DTB-21S7

[. . . ] Colour Television MANUAL INSTRUCTION DTB-21S6 DTB-21S7 GB CONTENTS REMOTE CONTROL & TV CONNECTIONS . 14 REMOTE CONTROL & TV CONNECTIONS REMOTE CONTROL UNIT TV mode A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 A26 POWER SOUND MUTE NUMBER 0. . 9 SLEEP TV / AV PROGRAM UP (CURSOR UP) VOLUME DOWN (CURSOR LEFT) . SKIP MOVE 3D(SOUND EFFECT) MODE ZOOM RECALL NORMAL OK/PRESET MENU VOLUME UP (CURSOR RIGHT) PROGRAM DOWN (CURSOR DOWN) TV TELETEXT . . A2 A1 TELETEXT mode A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 A26 POWER SOUND MUTE NUMBER 0. . 9 . [. . . ] The currently selected preset is displayed in the menu header. - The FAVOURITE preset contains the settings that you last entered. If the NTSC standard is detected (eg from VHS player connected to AV1), then TINT will available. Otherwise TINT will be displayed, but not selectable. PICTURE BRIGHTNESS CONTRAST COLOUR SHARPNESS TINT NOISE RED. FAVOURITE ON SOUND MENU (For operating instructions, see page 9, HOW TO USE THE SUB-MENUS) SOUND VOLUME BALANCE EQUALIZER AVL NORMAL OFF - Select VOLUME function to adjust the volume level. - Select BALANCE function to adjust sound balance between the left and right speakers. If the indicator is highlighted in red, then the central balance position has been found. - Use the EQUALIZER function to select the sound presets MUSIC, SPEECH, NORMAL, FAVOURITE by use of the CURSOR LEFT (A7), RIGHT (A20) buttons. The FAVOURITE preset contains the settings that you last entered into the EQUALIZER menu. - The OK button (A18) will enter the EQUALIZER menu, and allow you to change the FAVOURITE settings. - Automatic Volume Level (AVL, Option) feature has 4 levels according to your preference. This feature corrects for large volume level changes, such as occur when passing from a movie to advertisements. The AVL solves this problem by equalizing the volume level, over a SHORT MEDIUM or LONG period (referring to the time constant over which the equalizing effect lasts). EQUALIZER MENU EQUALIZER NORMAL - Select the equalizer band by use of the CURSOR LEFT (A7) or RIGHT (A20) buttons. - Adjust the level of each of the 5 equalizer bands, 100Hz, 300Hz, 1000Hz, 3000Hz, 8000Hz, by use of the CURSOR UP (A6) and DOWN (A21) buttons. - The above modified values are automatically stored in FAVOURITE mode. - The OK button (A18) will select the picture presets MUSIC, SPEECH, NORMAL, FAVOURITE. The currently selected preset is displayed in the menu header. - The FAVOURITE preset always contains the settings that you last entered. 100 300 1k 3k 8k 10 INSTALL MENU (For operating instructions, see page 9, HOW TO USE THE SUB-MENUS) Automatic tuning system Program list edition TV system modification Channel number Channel Frequency Channel name Program number Program storage number Automatic Tuning System If you have a satellite decoder: If your decoder is connected to the TV set by the aerial jack (C3), you must power on the demodulator and tune Sky News before starting ATSS. ATSS = Automatic Tuning and Sorting System. To start the ATSS function: - Select , , ATSS" function. - Press and hold the OK button (A18) to start the automatic tuning. The ATSS function has started when the phrase , , Please Wait!" appears (in red characters) in the help instructions box, below the Install menu. When the ATSS function is finished, the stored programs are displayed on screen using Edit menu presentation (to Exit tuning before automatic tuning finished, press the remote control MENU button (A19)) INSTALL ATSS EDIT SYSTEM CHANNEL FREQUENCY NAME PROGRAM STORE TO GB GB C46 671, 25 ABCDEFG 09 09 Country TV system Channel number Channel Frequency Channel name Program number Program storage number Program List Edition This allows you to easily manipulate the existing program order allocation, by using Edit menu functions described below. EDIT Program number Station name Channel number PR 03 02 00 99 98 97 NAME BBC1 BBC2 ------------CH C23 C33 S41 S41 S41 S41 SKIP Skip code : Program skipped Nothing : Program not skipped To enter the EDIT menu: From Install menu, select , , Edit", and press the OK button (A18): the EDIT menu appears. [. . . ] - Enter directly the subpage number you want with the remote control NUMBER 0. . 9 buttons (A3): for example to request the 2nd subpage, type 0002. - After a few seconds the subpage number is replaced by the page number in the header. You can press again SUBPAGE button (A10), to display the subpage number. - If the requested page is not immedietly available the rolling header will be active until the page arrives. [. . . ]