User manual DAEWOO DTC-1472

[. . . ] Accidental contact with high voltage components could result in electric shock. When internal adjustments are necessary, please contact your service centre. If your set produces sound but no picture, or if it emits smoke or produces a strange sound of smell, continuous operation is dangerous. Immediately remove the power plug from the socket and contact your service centre. [. . . ] v PR12 AUTO SEARCH SEARCH FINE TUNING AFT ON SKIP OFF BAND VHF-L PRESET PR (w/v ) PRESET SYSTEM PICTURE CONTROL CLOCK ON/OFF TIMER Ê CUR. v PR12 AUTO SEARCH SEARCH FINE TUNING AFT ON SKIP OFF BAND VHF-L PRESET PR (w/v ) Ê CUR. v q Ê q ENTER SELECTED STATE (YELLOW COLOR) CURSOR UP CURSOR UP DOWN PR12 AUTO SEARCH SEARCH FINE TUNING AFT ON SKIP OFF BAND VHF-L PRESET PR (w/v ) CUR v CUR w Ê CUR. v q PR12 AUTO SEARCH SEARCH FINE TUNING AFT ON SKIP OFF BAND VHF-L PRESET PR (w/v ) Ê CUR. w q PR12 AUTO SEARCH SEARCH FINE TUNING AFT ON SKIP OFF BAND VHF-L PR (w/v ) 11 SYSTEM q SYSTEM function is able to operate AUTO, PAL, SECAM, 4. 43NTSC, 3. 58NTSC ( SUB MENU ) q AUTO CUR. v PAL SECAM 4. 43NTSC 3. 58NTSC CUR. v ( MAIN MENU ) MENU PRESET q SYSTEM PICTURE CONTROL CLOCK ON/OFF TIMER SECAM 4. 43NTSC 3. 58NTSC CUR. v AUTO PAL q SECAM 4. 43NTSC 3. 58NTSC CUR. v AUTO PAL SECAM q 4. 43NTSC 3. 58NTSC CUR. w Ê AUTO PAL SECAM 4. 43NTSC q 3. 58NTSC NOTE q 4. 43NTSC system accept the video signal only. The wanted function is selected by moving the cursor with DOWN/UP buttons. q 12 PICTURE CONTROL ( SUB MENU ) ( MAIN MENU ) MENU q PRESET PICTURE CONTROL BRIGHTNESS SYSTEM PICTURE CONTROL CLOCK ON/OFF TIMER Ê CONTRAST COLOR SHARPNESS TINT CURSOR w/v ¡PR w/v 1. BRIGHTNESS Adjust for natural brightness if the picture appear too dark or light. CONTRAST This is used to obtain satisfactory range of the tone between black and white. A bright room will need the higher contrast setting than a dark room. COLOR Adjust the strength of the color as preferred. SHARPNESS This is used to change the sharpness degree of the picture. It is the most usable when watching programs from an external source such as a VCR. TINT TINT display appears and changes the tone of color. This OSD sign only appears when the 3. 58 NTSC signal is input. 13 CLOCK ( MAIN MENU ) MENU PRESET SYSTEM PICTURE CONTROL q CLOCK ON/OFF TIMER Ê ( SUB MENU ) PR (w/v) CLOCK ( SUB MENU ) CLOCK CUR (w/v) AM 12:00 Place the cursor at CLOCK using PR w/v button and ENTER(Ê) button. Then AM(or PM) character is changed to yellow color. After setting AM(or PM) using CURSOR w/v button, move the cursor to set the Hour. Then press cursor w button again to set the Minute. The Hour and Minute can be set by using the cursor w/v buttons. ON / OFF TIMER ( MAIN MENU ) MENU PRESET SYSTEM PICTURE CONTROL CLOCK q ON/OFF TIMER TIMER Ê ( SUB MENU ) PR (w/v) PM 8:00 ON OFF ( SUB MENU ) TIMER AM 12:00 CUR (w/v) ON AM 06:00 PRO EVERY DAY OFF PM 12:00 ON TIME 1. [. . . ] It could save your time and money. SYMPTOM No picture or sound. CHECK Check if the TV set is plugged in. Check if VOLUME and BRIGHTNESS controls are set to the minimum position. Picture ok; no sound. Check if VOLUME control is set to the minimum position. Picture lacks colour. Picture is too dark. Check if COLOUR, BRIGHTNESS and CONTRAST controls are correctly adjusted. Check if ANTENNA CABLE is broken. All channels lose colour intermittently. Check if ANTENNA CABLE is broken. [. . . ]