User manual DAEWOO DTC-21T9

[. . . ] Used batteries should be disposed of properly. AERIAL CONNECTION For better picture and sound quality, an effective aerial installation is the most important. If you are located in a relatively strong area, you will be able to use the indoor aerial. When using an outdoor aerial, it is usually connected to the set by means of 75 ohm coaxial cable. MAINS CONNECTION Plug the mains cable into the power socket with 100~250V, 50/60Hz AC. SWITCHING THE SET ON AND OFF Switching On Switch the set on with the MAIN POWER button in front of the receiver. If not, press either : - PR UP or DOWN button on the front of set - or POWER button or the UP/DOWN button or one of the NUMBER button 0. . 9 on the remote controller. [. . . ] FINE TUNING If you are unable to get a good picture or sound because of a poor broadcasting signal, it is possible to adjust the fine tuning. Move the cursor to and press UP or DOWN button to activate fine tuning up or down. It only operates while the UP or DOWN button is being pressed. At this time, PR No will be changed from white to cyan. ENTER A STATION NAME Locate a cursor to with LEFT/RIGHT button, then station name will be displayed on the screen. Select station name in the station name list with UP/DOWN button and press OK button. If you Want to delete a station name, select "-----". If you can't find the desired name in the list, you can enter your own. To do so, move the cursor to the right and press OK button. Using the UP/DOWN button, select the desired letter, number or blank. Press the RIGHT button to select the next position. Press the OK button to complete this procedure. SELECT SOUND SYSTEM If you heard strange sound or noise sound, then move the cursor to " B/D or I/M " with the LEFT/RIGHT button, sound system table will be displayed on the screen. Select the sound system " B/D or I/M " with the UP/DOWN button, then automatically sound will be changed. TO STORE PROGRAMME IN MEMORY Move the cursor to the right end with the LEFT/RIGHT button. Select the programme number that you want to store current displaying programme with station name and system in memory using the UP/DOWN button or NUMBER 0. . 9. Press the OK button. PRESET P01 B/D AUTO P-- SEARCH PRESET UHF >> P01 B/D AUTO P-- FINE TUNE PRESET UHF >> P01 B/D AUTO P-- ---BBC STAR SAU1 SAU2 MTV PRESET P01 B/D AUTO P-- B/D I/M PRESET P01 B/D AUTO P02 5 DAILY USE SELECTING A PROGRAMME NUMBER The NUMBER button 0. . 9 are used for direct programme selection. In order to select two-digit programme, press the second numbered button within two seconds. Switch through the programme number step by step with the UP/DOWN button. VOLUME AND PICTURE CONTROL VOLUME CONTROL Adjust the volume with the VOLUME DOWN/UP buttons on the front of the set, or with the LEFT/RIGHT button on the remote control. MUTE Pressing the MUTE button once turns the sound off. The sound returns if the button is pressed once more or the programme no. NORMAL PICTURE SELECTION When you press the NORMAL button repeatedly you can call up three picture settings; for NORMAL I(hard picture), NORMAL II(soft picture), FAVOURITE (adjustable picture). [. . . ] To exit, press SUBPAGE ( ) button again. WATCHING TELEVISION DURING TELETEXT MODE Some pages are continually update, for example, stock market reports, sports announcements, and the latest news. If you want to watch television and stay informed at the same time, press CANCEL ( ) button. The regular programme is still visible and the teletext symbol ( ) appears at the top of the screen. [. . . ]