User manual DAEWOO DTQ 25S3FC

[. . . ] INSTRUCTION MANUAL Color Television DTQ 25S3FC DTQ 27S3FC DTQ 27S4FC CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance. WARNING TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. NOTE TO CATV SYSTEM INSTALLER THIS REMINDER IS PROVIDED TO CALL THE CATV SYSTEM INSTALLER'S ATTENTION TO ARTICLE 820-40 OF THE NEC THAT PROVIDES GUIDELINES FOR PROPER GROUNDING AND, IN PARTICULAR, SPECIFIES THAT THE CABLE GROUND SHALL BE CONNECTED TO THE GROUNDING SYSTEM OF THE BUILDING, AS CLOSE TO THE POINT OF CABLE ENTRY AS PRACTICAL. CAUTION The AC power cord provided with this product is polarized (one blade wider than the other). To prevent electrical shock, match wide blade of plug to wide slot, fully insert the AC plug into a standard 120V~, 60Hz polarized outlet. NOTE Never connect the plug to an electrical source other than one providing 120V 60Hz power. [. . . ] Sharpness controls how the TV displays edges of objects on-screen. If the TV shows multiple vertical lines at the edges of an object, press the CVOL button; if the vertical edges of on-screen objects are fuzzy, press the VOLB button. The color setting controls the intensity of color. If the color is over-saturated, press the CVOL button; if the color is washed out, press the VOLB button. The tint setting controls the relationship of red and green in a picture. Tint is especially noticeable in flesh tones. If flesh tones seem too red or purple, press the VOLB button; if flesh tones are too green, press the CVOL button. 14 Chapter 3: Operating Your TV CHAPTER 4 Using Timer Functions Your TV has a built in-clock, and you can set the TV to turn on and off at times that you select. You can also set your TV to turn off after counting down a certain amount of time. Setting the Clock 1 With the TV turned on, press the MENU button until "Time" menu is displayed. 2 The "Set Clock" item will be selected. Press the CVOLB buttons to set the clock. If you hold down either CVOL or VOLB button, the corresponding numbers will change more quickly. 3 When the clock is set correctly, use the WCHV buttons to select another "Time" function, or press the MENU button to return to normal TV viewing. 1 2 3 Time Set Clock : Wake-Up Time : Off Time : Sleep Timer : : : : 0 min Time Set Clock : Wake-Up Time : Off Time : Sleep Timer : 1 2 : 00 AM : : 0 min Time Set Clock : Wake-Up Time : Off Time : Sleep Timer : 1 2 : 00 AM : : 0 min Select Adjust Next Select Adjust Next Select Adjust Next Setting the Wake-up time If you enter a time in the "Wake-Up Time" setting, your TV will automatically turn on at that time. Follow these instructions to set the "Wake-Up Time". After Wake-up Time is turned on the TV set, if user does not input the user control (e. g. remote CH or VOL key) within 15 minutes, the TV set will turn off automatically. If user inputs the user control within 15 minutes, the TV set will turn on continuously. It is a safety feature to prevent any kind of problem without human control. 1 With the TV turned on, press the MENU button until "Time" menu is displayed. 2 Use the WCHV buttons to select "Wake-Up Time" item. 3 If you hold down either CVOL or VOLB button, the corresponding numbers will change more quickly. 4 When the setting is correct, use the WCHV buttons to select another "Time" function, or press the MENU button to return to normal TV viewing. 1 2 3 Time Set Clock : Wake-Up Time : Off Time : Sleep Timer : 1 2 : 00 AM : : 0 min Time Set Clock : Wake-Up Time : Off Time : Sleep Timer : 1 2 : 00 AM : : 0 min Time Set Clock : Wake-Up Time : Off Time : Sleep Timer : 12 : 00 AM 06 : 30 AM : 0 min Select Adjust Next Select Adjust Next Select Adjust Next Chapter 4: Using Timer Functions 15 Setting the Off Time If you enter a time in the "Off Time" setting, your TV will automatically turn off at that time. Follow these instructions to set the "Off Time": 1 With the TV turned on, press the MENU button until "Time" menu is displayed. [. . . ] · If there is neither picture or sound, unplug the TV for 30 seconds, then plug it in and try again. There is no picture or sound on some UHF channels. If the other stations are OK, it may be a station problem. · Check that the antenna is connected, is in good working order, has no broken wires, and is adjusted correctly. [. . . ]