User manual DAEWOO DTZ-29

[. . . ] DMP3953400 HELPLINE NUMBER : 0870 100 2525 With queries, please quote the page number, reference number and model number GB DTC-20, 21 DTY-21, 25, 28, 29 DTZ-24, 28, 29 Colour Television MANUAL INSTRUCTION ADDITIONAL INFORMATION FOR TV'S SOLD IN GREAT BRITAIN The appliance is supplied with a moulded three pin mains plug fitted with 5Amp fuse. Should the fuse require replacement, it must be replaced with a fuse rated at 5 amp and approved by ASTA or BSI to BS1362. The plug contains a removable fuse cover that must be refitted when the fuse is replaced. In the event of the fuse cover being lost or damaged, the plug must not be used until a replacement cover has been obtained. Replacement fuse covers can be purchased from your nearest electrical dealer and must be the same colour as the original. If the moulded mains plug is unsuitable for the socket outlet in your home or is removed for any other reasons, then the fuse should be removed and the cut off plug disposed of safely to prevent the hazard of electric shock. [. . . ] - Select BALANCE function to adjust sound balance between the left and right speakers. If the indicator is highlighted in red, then the central balance position has been found. - Use the EQUALIZER function to select the sound presets MUSIC, SPEECH, NORMAL, FAVOURITE by use of the CURSOR LEFT (A7), RIGHT (A20) buttons. The FAVOURITE preset contains the settings that you last entered into the EQUALIZER menu. - The OK button (A18) will enter the EQUALIZER menu, and allow you to change the FAVOURITE settings. - Automatic Volume Level (AVL, Option) feature has 4 levels according to your preference. This feature corrects for large volume level changes, such as occur when passing from a movie to advertisements. The AVL solves this problem by equalizing the volume level, over a SHORT MEDIUM or LONG period (referring to the time constant over which the equalizing effect lasts). EQUALIZER MENU EQUALIZER NORMAL - Select the equalizer band by use of the CURSOR LEFT (A7) or RIGHT (A20) buttons. - Adjust the level of each of the 5 equalizer bands, 100Hz, 300Hz, 1000Hz, 3000Hz, 8000Hz, by use of the CURSOR UP (A6) and DOWN (A21) buttons. - The above modified values are automatically stored in FAVOURITE mode. - The OK button (A18) will select the picture presets MUSIC, SPEECH, NORMAL, FAVOURITE. The currently selected preset is displayed in the menu header. - The FAVOURITE preset always contains the settings that you last entered. 100 300 1k 3k 8k 10 INSTALL MENU (For operating instructions, see page 9, HOW TO USE THE SUB-MENUS) Automatic tuning system Program list edition TV system modification Channel number Channel Frequency Channel name Program number Program storage number Automatic Tuning System If you have a satellite decoder: If your decoder is connected to the TV set by the aerial jack (C3), you must power on the demodulator and tune Sky News before starting ATSS. ATSS = Automatic Tuning and Sorting System. To start the ATSS function: - Select , , ATSS" function. - Press and hold the OK button (A18) to start the automatic tuning. The ATSS function has started when the phrase , , Please Wait!" appears (in red characters) in the help instructions box, below the Install menu. When the ATSS function is finished, the stored programs are displayed on screen using Edit menu presentation (to Exit tuning before automatic tuning finished, press the remote control MENU button (A19)) INSTALL ATSS EDIT SYSTEM CHANNEL FREQUENCY NAME PROGRAM STORE TO GB GB C46 671, 25 ABCDEFG 09 09 Country TV system Channel number Channel Frequency Channel name Program number Program storage number Program List Edition This allows you to easily manipulate the existing program order allocation, by using Edit menu functions described below. EDIT Program number Station name Channel number PR 03 02 00 99 98 97 NAME BBC1 BBC2 ------------CH C23 C33 S41 S41 S41 S41 SKIP Skip code : Program skipped Nothing : Program not skipped To enter the EDIT menu: From Install menu, select , , Edit", and press the OK button (A18): the EDIT menu appears. The current program being displayed is highlighted in blue (on the central line). In the above case, the current program is PR00. The 3 previous, and 3 following programs, are always displayed. Any program from 00 to 99 can be selected, by using the remote control CURSOR UP (A6) / DOWN (A21) buttons. [. . . ] - Press the button again to hide the information. 15 TELETEXT FORMAT PICTURE & SOUND CONTROL Doubling character height Repeatedly pressing the HEIGHT ( ) button (A23) doubles the character height in the following order: Upper half of the page (UP) > Lower half of the page (DOWN) > Return to normal height. If the page is in UP or DOWN mode, then normal size is automatically set if : - A new page request is made (e. g. - VOLUME menu is activated the with the MENU button (A19). Note : The menu at the base of the screen is always visible Volume and brightness control in teletext mode VOLUME ( and sound MUTE), BRIGHTNESS controls are all possible in teletext. [. . . ]