User manual DAEWOO DUB-2842GB

[. . . ] DIGITAL TELEVISION INSTRUCTION MANUAL DUB-2850GB DUB-2842GB Help line Number: 0870 100 2525 ADDITIONAL INFORMATION FOR TV'S SOLD IN GREAT BRITAIN The appliance is supplied with a moulded three pin mains plug fitted with 5Amp fuse. Should the fuse require replacement, it must be replaced with a fuse rated at 5 amp and approved by ASTA or BSI to BS1362. The plug contains a removable fuse cover that must be refitted when the fuse is replaced. In the event of the fuse cover being lost or damaged, the plug must not be used until a replacement cover has been obtained. Replacement fuse covers can be purchased from your nearest electrical dealer and must be the same colour as the original. If the moulded mains plug is unsuitable for the socket outlet in your home or is removed for any other reasons, then the fuse should be removed and the cut off plug disposed of safely to prevent the hazard of electric shock. [. . . ] This function is only selectable when the default picture format is currently active (see also FORMAT SELECTION, AUTO setting, page 9). This selects the default format to be used only when the format selected with the ZOOM button (A18) is AUTO, and no picture format signalling data is received. Change language to English, Welsh, Gaelic. 1. - In stand-by mode, the stand-by indicator flashes red and green to indicate the CHILD LOCK is set. - The front panel TV buttons (B4, B5, B8, B8) become inactive and the TV will only respond to the remote control. Switch the WAKE UP function OFF or 'ON' (the time will be shown e. g. 07:15) with the remote control CURSOR LEFT (A12) /RIGHT (A12) buttons - Enter the wake up time with the remote control 0. . . 9 NUMBER (A6) buttons. Adjust TV turn-on program number D: Digital chanel A: Analog chanel To change digital <--> analogue, press D/A button. Clock will start at 0 seconds upon entry of the 4th figure. Choose your preferred default format with the remote control CURSOR LEFT (A12) /RIGHT (A12) buttons. Note : For 4:3 TVs FULL SCREEN is represented by 4:3. For 16:9 TVs FULL SCREEN is represented by 16:9. FEATURES CHILD LOCK WAKE TIME WAKE PROG. CLOCK ZOOM AUTO LANGUAGE SOFTWARE UPDATE Position MENU Exit OFF OFF D 999 --:-16 : 9 ON / OFF 7. Occasionally, a newer version of software may become availiable. If you want to stop the process, you can press MENU key. You must not turn off the TV while downloading is in progress, as errors could occur. This menu is only activated on digital mode. * For an automatic searching a new software, your TV checks transport stream of the DVB-T broadcast once a day when turning off the TV pressing power button (A1) on the remote control. The picture is off but power is supplied during searching. The TV will go to stand-by mode after finishing search. If the TV find a newer version of software, a update message may be shown when you turn on your TV. It you don't want the TV to search a new software when turning off the TV by remote control, keep pressing power button (A1) about 2~3 sec. SYSTEM SOFTWARE UPDATE IN PROGRESS NEW SOFTWARE FOUND PRESS OK TO UPDATE OR MENU TO EXIT Upgrade message when your TV find a newer version of software 0% 100% TOTAL UDPDATE TIME WILL BE APPROXIMATELY 10 MINUTES. [. . . ] Picture/Sound controls set at minimum levels. Colour controls set at minimum levels. No Colour Normal Sound Poor or Distorted Picture Weak or No Sound ? OK Retune Channel(s). Coloured Patches Normal Sound Magnetic interference from unshielded equipment. Receiver moved while Switched ON, switch TV off for 30 minutes. Switching NICAM setting to off until reception improves. Normal Picture Weak or Distorted Sound Can't record Digital signal with Video or DVD recoder. This model has 2 scart sockets, but you can record Digital signal only from scart 2 socket. [. . . ]