User manual DAEWOO DV-6T834NP

[. . . ] Owner's Manual DVD-VIDEO PLAYER [Hi-Fi Model] DV­6T834N DV­6T834B DV­6T834NP DV­6T844N DV­6T844B DV­6T955B DV­6T975B DV­6T985B DV­6T985M DV­6T999B DV­6T999N DV­6T534B DV­6T544N DV­6T544B [Mono Model] DV­6T534N N In the initial settings, exclusive channel for DVD/Video is set to CH 3. Set the TV channel to CH3 before using it. N Region code of DVD/Video player for home is 1 or ALL. In inserting a disc with other region code, it does not operate. [. . . ] Do not insert fingers or any foreign object beyond the door flaps of the cassette compartment; this could lead to injury or equipment damage. Removing video cassettes Press [VCR EJECT] on the front panel and the VCR will eject the tape. Do not attempt to pull out the video cassette after the unit begins to load the video cassette. Let it finish loading, then press [EJECT] to eject it. · Audio-visual material may include works of copyright which must not be recorded without authorization of the copyright owner. 28 WATCHING AND RECORDING CABLE TV I Because of the nature of converter boxes, you cannot watch one Cable TV channel and record another at the same time. To Watch and Record Cable TV 1 2 1 2 3 Turn on the cable box and then set a channel to watch or to record. Turn on the DVD+VCR and then set the DVD+VCR channel connected to the converter (CH03/04/EXTERNAL INPUT). Power on TV and then set the channel connected to the DVD+VCR (CH03/04/VCR). Recording while Watching With the setup described above, the channel selected by the converter is displayed on screen. Press [REC] on the DVD+VCR to record the channel selected by the converter, or press [REC] repeatedly to set One Touch Recording (OTR) (see page 25). VCR OPERATION TIMER RECORDINGS from Cable TV Program VCR. Follow the instructions on page 26 for setting a Timer Recording. Set the DVD+VCR to the channel input from the converter box (CH3, CH4 or EXTERNAL INPUT). Enter date and time of the cable program in the Timer Recording menu. Set Channel on Converter Box. Set converter to the cable TV channel you wish to record. for example to record CH48, Display CH48 with CONVERTER CHANNEL SELECT button. Complete Timer Recording. If you leave the cable box turned on, the DVD+VCR powers on automatically and starts recording at the programmed time. 29 USING ADVANCED VCR FEATURES Auto Playback I With Auto Play turned on (the factory default setting), the DVD+VCR player automatically starts playback when you insert a tape with its safety tab removed. 1 2 Press [SETUP] and select "FUNCTIONS". Move to "FUNCTIONS" with [v] and press [ENTER]. SETUP CLOCK SET TIMER RECORDINGS CHANNEL SET FUNCTIONS LANGUAGE SELECT Move: End: SETUP Select: ENTER Press [ENTER] to switch between ON and OFF. - Select ON if you want a tape with its safety tab removed to start playing automatically when the tape is inserted. - Select OFF if you do not want a tape with its safety tab removed to start playing automatically. FUNCTIONS Auto Play: Auto TV/VCR: Index Search Go-To Search Set Auto Repeat Move: End: SETUP ON ON Select: ENTER Switch the VCR to TV or VCR mode automatically I Auto TV/VCR Controls whether the DVD/VCR's TV/VCR setting changes automatically to VCRviewing mode when turned on. 1 2 Press [VCR] to enter VCR mode. Press [SETUP] and select "FUNCTIONS". Move to "FUNCTIONS" with [v] and press [ENTER]. FUNCTIONS Auto Play: Auto TV/VCR: Index Search Go-To Search Set Auto Repeat ON ON Press [ENTER] to switch between ON and OFF. - Select ON if you want the VCR to switch to the VCR mode when the VCR is Move: Select: ENTER turned on or a cassette is inserted. This End: SETUP only applies if you connect the ANT. IN and RF OUT jacks of your VCR and TV and watch your VCR on channel 3 of your TV. - Select OFF if you want the VCR to remain in TV mode. This is useful if you watch your VCR on the TV's video input and you don't want your antenna/cable signal interrupted by the VCR. 30 USING ADVANCED VCR FEATURES Searching a cassette tape for programs (indexing) I When you record a program, the VCR places an index mark at the start of the recording. To search for an index mark: FUNCTIONS Auto Play: Auto TV/VCR: Index Search Go-To Search Set Auto Repeat ON ON 1 2 Press [SETUP] and select "FUNCTIONS". Select "Index Search". INDEX SEARCH If you want to scan through a certain number Press REW or FF of index marks, use the number buttons to to begin searching enter the number of marks you want to or Enter a specific search. Press [CLEAR] on the remote to index number correct an entry. -or End: SETUP Press [REW] to search backward or [FF] to search forward. The VCR will locate your index mark and begin playback. If you did not enter a specific index number, the VCR will locate the next index mark and begin playback. Press [STOP] to stop index searching. VCR OPERATION · If two recordings overlap, the index mark for the second program will be erased. [. . . ] Refer to its user manual for instructions. (Please cancel it. ) Did you turn off your player?(Please turn it on. ) The selected channel cannot be stored. Please check your channel settings or press a number button. [. . . ]