User manual DAEWOO DV6T811N

[. . . ] DVD-Video(USA)_DV6T811N-LT 02. 4. 16 4:40 PM `A DVD-VIDEO PLAYER Owner's Manual DV6T811N [Hi-Fi] x In the initial settings, exclusive channel for DVD/Video is set to CH 3. Set the TV channel to CH3 before using it. x Region code of DVD/Video player for home is 1 or ALL. In inserting a disc with other region code, it does not operate. [. . . ] There are four types of video cassettes: T-60, T-90, T-120, and T-160. The amount you can record on a tape is dependent upon the tape speed at which you record. The table below lists the recording time(hours:minutes) for each tape type according to recording speed. Tape Type T-60 T-90 T-120 T-160 SP Mode EP Mode (Standard Play) (Extended Play) 1:00 1:30 2:00 2:40 3:00 4:30 6:00 8:00 Protecting video cassettes from accidental erasure Cassettes have a safety tab to prevent erasure. Break off the safety tab with a screw driver. If you wish to record on a cassette without a safety tab, cover the hole with cellophane tape. VCR Operation Inserting video cassettes Firmly insert the cassette into the cassette compartment with the label up. An inverted cassette cannot be inserted. Removing video cassettes Press [EJECT] on the front panel and the VCR will eject the tape. Pull the cassette out gently. CHECK UP! · Audio-visual material may include works of copyright which must not be recorded without authorization of the copyright owner. · If you insert a video cassette without a safety tab into the unit : After setting the timer recording program, " " will blink on the display panel in the power off mode and the unit will automatically eject the cassette. In the power on mode, the unit will playback automatically. · If you insert a video cassette with a safety tab into the unit : After setting the timer recording program, the unit will be stand-by mode in power off mode. · Do not attempt to pull out the video cassette once the unit begins to load the video cassette. · Do not insert fingers or any foreign object beyond the door flaps of the cassette compartment; this could lead to injury or equipment damage. · Do not attempt to insert a video cassette if the unit in unplugged. 39 DVD-Video(USA)_DV6T811N-LT 02. 4. 16 2:38 PM ` 40 Watching and Recording Cable TV To Watch and Record Promptly Cable TV 1 2 1 2 3 40 Power on converter and then, set a channel to watch or to record. Power on DVD-video and then, set the channel of DVD-video to the converter-connected channel (one of CH03/04/EXTERNAL INPUT). Power on TV and then, set the video-connected channel (one of CH03/04/VCR). Simultaneous Recording and Watching At this time, CH selected by the converter is displayed on TV screen. Simultaneously, press REC button of DVD-Video to record the CH selected by the converter, and press REC button more than two times to set on One Touch timer Recording (OTR). TIMER RECORDINGS of Cable TV Reserve VCR. According to TIMER REC procedures, select TIMER RECORDINGS SET window and complete the settings. At this time, the video channel should be input in CH3 (or CH4, EXTERNAL INPUT) of the converter-connected channel. Enter date and time of the cable program for TIMER RECORDINGS. Adjust Converter. Set converter to the cable TV channel to record. e. g. ) To record CH48, Display CH48 with CONVERTER CHANNEL SELECT button. If there is TIMER REC function of converter, it is available of reservation. Complete Reservation. If you power on converter, video powers on automatically and starts recording at the reserved time. **Home watching cable TV is unavailable of simultaneous recording function (while recording NBC program, watching CNN program). (Owing to mechanical features of converter, it is unavailable of simultaneous reception of two channels. ) DVD-Video(USA)_DV6T811N-LT 02. 4. 16 2:38 PM ` 41 Using advanced features Play the tape automatically This feature allows the VCR to automatically start playing when you insert a tape with the safety tab removed. 1 2 Press [SETUP/ENTER] button and select "FUNCTIONS". Move into "FUNCTIONS" with [ ] and then, select the desired one with [ ] button. SETUP CLOCK SET TIMER RECORDINGS CHANNEL SET FUNCTIONS LANGUAGE SELECT Move: End:RETURN Select: Press [ ] to switch between ON and OFF. FUNCTIONS Auto Play: Auto TV/VCR: Viss + Viss Counter 0 Stop Move: End:RETURN ON ON - Select ON if you want a tape with its safety tab removed to start playing automatically when the tape is inserted. [. . . ] Were a converter manufacturer setup and output channel right?(Please cancel it. ) Did you turn off your player?(Please turn it on. ) · Once pressing "REC", a videotape is ejected automatically. · Timer recording of Cable TV does not work. · In spite of pressing "CHANNEL", a channel can not be set. · While duplicating, screen is not clean and distorted. ® You may not memorize channels. [. . . ]