User manual DAEWOO DV6T812N

[. . . ] DVD-VIDEO PLAYER Owner s Manual DV6T812N DV6T512N x In the initial settings, exclusive channel for DVD/Video is set to CH 3. Set the TV channel to CH3 before using it. x Region code of DVD/Video player for home is 1 or ALL. In inserting a disc with other region code, it does not operate. [. . . ] To leave your cable box on and tuned to preset channel. VCR Operation Select "Timer Recording method". Move into desired recording type with [ ] and then, select the desired one with [ENTER] button. For Timer Recording method details, see "Various TIMER REC" in the page 24. How often do you want to record program?One Time Daily (Sun-Sat) Weekdays (Mon-Fri) Weekly (Once a Week) Move: End: SETUP Select: ENTER To Confirm or Cancel TIMER RECORDINGS Select "a broadcasting to record". Select the desired broadcasting channel with [NUMBER] buttons. **If Converter Box and video are connected to Video/Audio terminal, set "EXTERNAL INPUT" on TIMER REC CH by using "OUTPUT" button. PROGRAM1 (ONE TIME) Channel 0 4 Cable Start Date - - / - Start Time - - : - - AM End Time - - : - - AM Tape Speed SP Move: Video: OUTPUT Input: End: SETUP 1 2 Select "Review/Cancel Programs". TIMER RECORDINGS Make a New Program Review/Cancel Programs Move: End: SETUP Select: ENTER Confirm reservation-recording details in turn with [ ] button and then, press [CLEAR] button on the position of the details to delete. When moves into "Cable", select one of "Cable"/"Antenna" with [ ] or [ ] button. PROGRAM 1 (ONE TIME) Channel 104 Cable Start Date 06 / 04 Start Time 10 : 10 AM End Time 11 : 10 AM Tape Speed SP Cancel: CLEAR End: SETUP Move: 5 22 Set "the date and time to record". Select the date, start time and end time to record with [NUMBER] buttons. PROGRAM1 (ONE TIME) Channel 104 Cable Start Date - - / - Start Time - - : - - AM End Time - - : - - AM Tape Speed SP Move: Video: OUTPUT Input: End: SETUP Timer Program Setting Press [T-REC] button. You can set the Timer Program. Before timer program setting, clock should be set correctly and video mode should be selected. 23 Timer Recordings Watching and Recording Cable TV To Watch and Record Promptly Cable TV Various TIMER RECORDINGS One Time : It is available of TIMER RECORDINGS at the desired specified time. Daily : Once you set TIMER RECORDINGS of the desired program telecasted at the same time day after day, it is available of daily recordings. It is available of TIMER RECORDINGS from Sunday to Saturday. Weekday : It is similar to Daily TIMER RECORDINGS, but this TIMER RECORDINGS is available from Monday to Friday. Weekly : Once you select one day of the week, it is available of TIMER RECORDINGS in the same day weekly. 1 2 Power on converter and then, set a channel to watch or to record. Power on DVD-video and then, set the channel of DVD-video to the converter-connected channel (one of CH03/04/EXTERNAL INPUT). Power on TV and then, set the video-connected channel (one of CH03/04/VCR). Using video cassettes Before you play or record on a video cassette tape, be certain to read this information on the proper care and use of video cassettes. Only use video cassettes that bear the VHS mark: . There are four types of video cassettes: T-60, T-90, T-120, and T-160. The amount you can record on a tape is dependent upon the tape speed at which you record. The table below lists the recording time(hours:minutes) for each tape type according to recording speed. Tape Type SP Mode (Standard Play) SLP Mode (Extended Play) T-60 1:00 3:00 T-90 1:30 4:30 T-120 2:00 6:00 T-160 2:40 8:00 Simultaneous Recording and Watching At this time, CH selected by the converter is displayed on TV screen. Simultaneously, press [REC] button of DVD-Video to record the CH selected by the converter, and press [REC] button more than two times to set on One Touch timer Recording (OTR). VCR Operation TIMER RECORDINGS of Cable TV Protecting video cassettes from accidental erasure Cassettes have a safety tab to prevent erasure. Break off the safety tab with a screw driver. If you wish to record on a cassette without a safety tab, cover the hole with cellophane tape. 1 2 3 Reserve VCR. According to TIMER REC procedures, select TIMER RECORDINGS SET window and complete the settings. At this time, the video channel should be input in CH3 (or CH4, EXTERNAL INPUT) of the converter-connected channel. Enter date and time of the cable program for TIMER RECORDINGS. Inserting video cassettes Firmly insert the cassette into the cassette compartment with the label up. An inverted cassette cannot be inserted. Adjust Converter. Set converter to the cable TV channel to record. e. g. ) To record CH48, Display CH48 with CONVERTER CHANNEL SELECT button. If there is TIMER REC function of converter, it is available of reservation. Removing video cassettes Press [EJECT] on the front panel and the VCR will eject the tape. [. . . ] ® Please check your channel setting or press a number button. ® Some tapes or discs distributed in the market for lending is set to prevent copy in manufacturing. These tapes cannot be duplicated in a good condition. ® A receiver of remote control may be different with a sender. [. . . ]