User manual DAEWOO DVD820

[. . . ] Owner's Manual ENGLISH DVD-VIDEO PLAYER DVD825/DVD820 P/N : 97P95600N0-G3 DCSD8711/5911N-PS(GB) 2005. 3. 17 1:39 PM á^1 IMPORTANT SAFEGUARDS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. [. . . ] Do not attempt to pull out the video cassette after the unit begins to load the video cassette. Let it finish loading, then press [OPEN/CLOSE] to eject it. Audio-visual material may include works of copyright which must not be recorded without authorization of the copyright owner. 29 DCSD8711/5911N-PS(GB) 2005. 3. 17 1:40 PM á^3 0 WATCHING AND RECORDING CABLE TV Because of the nature of converter boxes, you cannot watch one Cable TV channel and record another Cable TV channel at the same time. To Watch and Record Cable TV 1 2 1 2 3 Turn on the cable box and then set a channel to watch or to record. Turn on the DVD+VCR and then set the DVD+VCR channel connected to the converter (CH03/04/EXTERNAL INPUT). Power on TV and then set the channel connected to the DVD+VCR (CH03/04/VCR). Recording while Watching With the setup described above, the channel selected by the converter is displayed on screen. Press [REC q] on the DVD+VCR to record the channel selected by the converter, or press [REC q] repeatedly to set One Touch Recording (OTR) (see page 26). VCR OPERATION TIMER RECORDINGS from Cable TV Program VCR. Follow the instructions on page 27 for setting a Timer Recording. Set the DVD+VCR to the channel input from the converter box (CH3, CH4 or EXTERNAL INPUT). Enter date and time of the cable program in the Timer Recording menu. Set Channel on Converter Box. Set converter to the cable TV channel you wish to record. for example to record CH48, Select CH48 on your converter box. Complete Timer Recording. Leave the cable box turned on, the DVD+VCR powers on automatically and starts recording at the programmed time. 30 DCSD8711/5911N-PS(GB) 2005. 3. 17 1:40 PM á^3 1 USING ADVANCED VCR FEATURES Auto Playback With Auto Play turned on (the factory default setting), the DVD+VCR player automatically starts playback when you insert a tape with its safety tab removed. 1 2 3 1 2 Press [SETUP] and select "FUNCTIONS". Move to "FUNCTIONS" with [] and press [ENTER]. SETUP CLOCK SET TIMER RECORDINGS CHANNEL SET FUNCTIONS LANGUAGE SELECT Move: End: SETUP Select: ENTER Press [ENTER] to switch between ON and OFF. FUNCTIONS Auto Play: Auto TV/VCR: Index Search Go-To Search Set Auto Repeat ON ON - Select ON if you want a tape with its safety tab removed to start playing Move: Select: ENTER automatically when the tape is End: SETUP inserted. - Select OFF if you do not want a tape with its safety tab removed to start playing automatically. Press [SETUP] to confirm your selection and return to the previous menu screen. Switch the VCR to TV or VCR mode automatically The "Auto TV/VCR " function controls whether the DVD/VCR's TV/VCR setting changes automatically to VCR-viewing mode when turned on. Press [VCR] to enter VCR mode. Press [SETUP] and select "FUNCTIONS". Move to "FUNCTIONS" with [] and press [ENTER]. FUNCTIONS Auto Play: Auto TV/VCR: Index Search Go-To Search Set Auto Repeat ON ON Press [ENTER] to switch between ON and OFF. - Select ON if you want the VCR to switch to the VCR mode when the VCR is Move: Select: ENTER turned on or a cassette is inserted. This End: SETUP only applies if you connect the ANT. IN and RF OUT jacks of your VCR and TV and watch your VCR on channel 3 of your TV. - Select OFF if you want the VCR to remain in TV mode. This is useful if you watch your VCR on the TV's video input and you don't want your antenna/cable signal interrupted by the VCR. 3 31 Press [SETUP] to confirm your selection and return to the previous menu screen. USING ADVANCED VCR FEATURES Searching a cassette tape for programs (indexing) When you record a program, the VCR places an index mark at the start of the recording. To search for an index mark: 1 2 Press [SETUP] and select "FUNCTIONS". Select "Index Search". FUNCTIONS Auto Play: Auto TV/VCR: Index Search Go-To Search Set Auto Repeat ON ON INDEX SEARCH If you want to scan through a certain number Press REW or FF of index marks, use the number buttons to to begin searching enter the number of marks you want to or Enter a specific search. Press [CLEAR] on the remote to index number correct an entry. -or End: SETUP Press [REW oe to search backward or [FF oe] to search forward. The VCR will locate your index mark and begin ] playback. If you did not enter a specific index number, the VCR will locate the next index mark and begin playback. Press [STOP] to stop index searching. VCR OPERATION If two recordings overlap, the index mark for the second program will be erased. Therefore, when you use the index feature to find the second program, the VCR will skip over it. If you record multiple programs in one recording session, the VCR will only find the index mark that was placed on the video cassette tape when the recording session began. Some index marks that may be missed by the VCR : A mark too close to your location on the tape. [. . . ] Check whether the timer recording settings are right. Are RF cables connected to the antenna connection correctly? Does a channel number appear on the display? Check the record safety tab on the videotape. [. . . ]