User manual DAEWOO DVD825

[. . . ] Owner's Manual ENGLISH DVD-VIDEO PLAYER DVD825/DVD820 P/N : 97P95600N0-G3 DCSD8711/5911N-PS(GB) 2005. 3. 17 1:39 PM á^1 IMPORTANT SAFEGUARDS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. [. . . ] - Select OFF if you want the VCR to remain in TV mode. This is useful if you watch your VCR on the TV's video input and you don't want your antenna/cable signal interrupted by the VCR. 3 31 Press [SETUP] to confirm your selection and return to the previous menu screen. USING ADVANCED VCR FEATURES Searching a cassette tape for programs (indexing) When you record a program, the VCR places an index mark at the start of the recording. To search for an index mark: 1 2 Press [SETUP] and select "FUNCTIONS". Select "Index Search". FUNCTIONS Auto Play: Auto TV/VCR: Index Search Go-To Search Set Auto Repeat ON ON INDEX SEARCH If you want to scan through a certain number Press REW or FF of index marks, use the number buttons to to begin searching enter the number of marks you want to or Enter a specific search. Press [CLEAR] on the remote to index number correct an entry. -or End: SETUP Press [REW oe to search backward or [FF oe] to search forward. The VCR will locate your index mark and begin ] playback. If you did not enter a specific index number, the VCR will locate the next index mark and begin playback. Press [STOP] to stop index searching. VCR OPERATION If two recordings overlap, the index mark for the second program will be erased. Therefore, when you use the index feature to find the second program, the VCR will skip over it. If you record multiple programs in one recording session, the VCR will only find the index mark that was placed on the video cassette tape when the recording session began. Some index marks that may be missed by the VCR : A mark too close to your location on the tape. The mark at the beginning of a recorded segment of five minutes or less. The first index mark on the tape when you start at the beginning of the tape. Searching with the tape counter (Go-To Search) The tape counter helps you locate segments by their position on the tape. The counter is in hours, minutes and seconds. 1 2 Press [SETUP] and select "FUNCTIONS". Select "Go-To Search". The tape counter is displayed on the screen. Use the [0-9] keys to enter the tape counter you want to find and press [REW oe or [FF The VCR will search for oe] ]. the time counter you specified. FUNCTIONS Auto Play: Auto TV/VCR: Index Search Go-To Search Set Auto Repeat ON ON GO-TO SEARCH Current tape counter is 2 : 17 : 18 Press REW or FF to go to - : - - : 00 32 DCSD8711/5911N-PS(GB) 2005. 3. 17 1:40 PM á^3 3 USING ADVANCED VCR FEATURES Set Auto Repeat You can set the DVD/VCR to play the same segment of a tape over and over in a repeating loop. 1 2 3 1 2 3 Press [SETUP] and select "FUNCTIONS". Select "Set Auto Repeat". The Set Auto Repeat menu will ask for a loop end time to be specified. To turn off Set Auto Repeat, press the [CLEAR] button. FUNCTIONS Auto Play: Auto TV/VCR: Index Search Go-To Search Set Auto Repeat ON ON AUTO REPEAT Set the length of time you want the tape to play in a repeating loop Loop from 0:00 to - : - (h:mm) Cancel: CLEAR End: SETUP Press [SETUP] to confirm your selection and return to the previous menu screen. Auto DST (Daylight Savings Time) Press [VCR], then press [SETUP] and select "CLOCK SET". Move into "Auto DST" with []. CLOCK SET Time and Date Set Auto DST : ON Press [ENTER] to switch between ON and OFF. - Select ON if you want the VCR's clock to adjust automatically for DST. - Select OFF if you do not want the clock to automatically adjust for DST. Move: End: SETUP Select: ENTER Press [SETUP] to confirm your selection and return to the previous menu screen. SPRING Forward ; Fall Backward In the Spring, daylight-saving time begins on the first Sunday in April. Because the clock automatically changes from 2:00 AM to 3:00 AM (forward one hour), remember to include the extra hour for timer recording falling within this time frame. [. . . ] You may have started recording while the VCR was paused. Select "CABLE" not "ANTENNA" in the "CHANNEL SETTING" menu. In spite of pressing [CH+/-], a channel can not be set. Screen is distorted while playing a copy of a tape. Remote control does not work. [REW] and [FF] Buttons on remote control do not work. VISS index search does not work. Cable broadcasting can not be selected. 55 DCSD8711/5911N-PS(GB) 2005. 3. 17 1:40 PM á^5 6 SPECIFICATIONS Power requirement Power consumption Weight Dimensions (WxHxD) Operating temperature Installation conditions Channel coverage Signal type Antenna Input/output VIDEO input AUDIO input VHF output VIDEO output DVD/VCR DVD AUDIO output DVD/VCR DVD Playable tapes Playable discs Tape speed Playtime Clock display Timer Recording VIDEO S/N (VCR) Resolution AUDIO VCR DVD VCR DVD AUDIO dynamic range AC/CA 120V, 60Hz 24W (supplementary 4W) 9. 9 lbs (4. 5kg) 17. 1" x 3. 7" x 10. 0" (435mm x 93mm x 255mm) 41F~95F (5C~35C) Horizontal / Relative humidity under 80% VHF: 2-13 CH / UHF: 14-69 CH / Cable: 1-125 NTSC COLOR U/V-mixed: 75 unbalanced 1. 0 Vp-p unbalanced, RCA JACK -8. 8dBm, RCA JACK 3 or 4 CH VIDEO output terminal, 1. 0 Vp-p unbalanced, RCA JACK S-VIDEO output (75 In load Y: 1. 0Vp-p, C:0. 286Vp-p) COMPONENT output (75 In load Y: 1. 0Vp-p, Pb:0. 7Vp-p, Pr:0. 7Vp-p) Audio output terminal (2 kinds): -8. 8dBm(VCR), 2. 0Vrms(DVD), RCA JACK Analogue AUDIO output (2 CH): 2. 0Vrms Digital audio output (COAXIAL) Very high dense tapes with VHS marks DVD, VIDEO-CD, CD (12mm), CD (8mm), MP3, CD-R, CD-RW SP: 33. 35mm/s, SLP: 11. 12mm/s SP: 2hrs, SLP: 6hrs (use of T-120 tape) 12 hrs AM/PM 8 programs a year Over 45dB (Standard recording) Over 220 lines (Standard recording) Over 500 lines (DVD Disc PLAY) Over 69dB (Hi-Fi), Over 40dB (Mono) 90dB 90dB DVD Audio output standards Output Analogue Audio output Digital Audio output Disc type DVD 48/96KHz sampling 48KHz sampling VIDEO-CD 44. 1KHz sampling 44. 1KHz sampling CD 44. 1KHz sampling 44. 1KHz sampling HELP 56 MAGNASONIC HOME ENTERTAINMENT WARRANTY We appreciate your purchase of a MAGNASONIC Home Entertainment product. [. . . ]