User manual DAEWOO DVR-S04 annexe 1

[. . . ] DVD Recorder + VCR DVR-S04/DVR-S05 User Manual P/N : 97P95600N0-E0 Important Safeguards CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated `dangerous voltage` within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance. Important Safeguards INTRODUCTION REGULATORY INFORMATION: FCC Part 15 This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the product is operated in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. [. . . ] If playback does not start, press [PLAY ()]. In some cases, the Disc menu might appear instead. 1 2 3 4 Press [DISPLAY] during playback. The on-screen display appears on the TV screen. Use [. . . ] to select the `Angle` icon on the on-screen display. Press [ENTER] to confirm. Playing a DVD+R (+RW) When a DVD+RW or unfinalized DVD+R is inserted, no title is played automatically but the current TV channel displays on the screen. If you want to play a title on the DVD+R (+RW), you must press [MENU] or [PLAY] to display the disc menu. Select a title to play then press [ENTER]. If a Disc menu is displayed · A Disc menu may be displayed when you load a DVD. Use the [oe . . . ] buttons to select the title/chapter you want to view, then press [ENTER] to start playback. Press [TITLE] or [MENU] to return to the Disc menu. · If the Parental Level feature is set and the disc is below the current Parental Level setting, the 4-digit code must be entered and/or the disc must be authorized; see `Set Parental Level` on page 24. · The DVD Recorder+VCR will not play discs with Region codes different from the DVD Recorder+VCR. The Region code for this DVD Recorder+VCR is 1 (one). · Unless stated otherwise, all operations described below use the remote control. Some features may also be available in the Setup menu. · A disc which is recorded by computer at high speeds (greater than or equal to 2x) may not be recognized. · A disc which is recorded with unauthorized movie material may not be played. · A disc which is recorded by other recorder or not recorded correctly may not be recognized or played. Audio Shows the current audio soundtrack language, encoding method, and channel number, and changes the setting. 1 2 3 4 Press [DISPLAY] during playback. The on-screen display appears on the TV screen. Use [. . . ] to select the `Audio` icon on the on-screen display. Press [ENTER] to confirm. PLAYBACK Subtitle Shows the current subtitle language, and changes the setting. 1 2 3 4 Press [DISPLAY] during playback. The on-screen display appears on the TV screen. [. . . ] When condensation has occurred, wait a few hours for the DVD Recorder+VCR to dry before using it. Select the channel on the DVD Recorder+VCR's built-in TV tuner. Stereo is available only via A/V output from DVD Recorder+VCR. See `Changing the TV Audio Channel` on page 29. Point the remote control at the remote sensor of the DVD Recorder+VCR. [. . . ]