User manual DAEWOO DWF-201M

[. . . ] DWF-201M 97. 1. 19 4:23 PM `1 = Full-Auto Electric Washing Machine Model: DWF-201M INSTRUCTION MANUAL First applying the Radical Technology in the world . . . go beyond washing, sterilize your colthes and deodorize a bad smell. First applying the Air Bubble Washing System in the world. Improving washing performance by more than 35%, while reducing power consumption by 40%. [. . . ] COLD ¨ COLD + HOT ¨ HOT · In case of the single valve model, there is no wash temperature selector function. · It can be used to adjust amount of water according to the size of the load to be washed. · As the button is pressed, water level is selected by E. LOW ¨ LOW ¨ MEDIUM ¨ HIGH · It is the button for the partial process or the combination of each process (wash, rince, spin) (See page 10) · It can be used to select the full-automatic course. · As the button is pressed, course will be selected by following order: FUZZY ¨ BLANKET ¨ WOOL ¨ ECONOMY. Press water level selector as your decision. Press Start/Hold to start. 1 Press the power switch. 2 Selecting Course ADD RINSE (1 time) Press the Process button, one time. Only Spin Press the Process button, two times. Rinse & Spin Press the Process button, three times. Rinse & Spin & Rinse Press the Process button, four times. Only Rinse Press the Process button, five times. Only Wash Press the Process button, six times. q WASH q RINSE q ADD q SPIN r WASH r RINSE r ADD q SPIN r WASH q RINSE r ADD q SPIN r WASH q RINSE q ADD q SPIN r WASH q RINSE r ADD r SPIN q WASH r RINSE r ADD r SPIN 3 Selecting 4 Pressing the Water level & Start/Hold Water Temp. Switch r WASH r RINSE r ADD r SPIN r HIGH r MID. r LOW r E. LOW PROCESS POWER End of Washing WATER LEVEL START HOLD It is Informed by buzzer IN CASE OF ONLY DRAIN 1 Press the power button. (It same with spin only) 3 Press Start/Hold with opening DOOR. START HOLD POWER PROCESS · After finishing Drain, the Buzzer is ringing and PCB is displaying "LE" message. · After Drain, please turn off the power. 10 DWF-201M 97. 1. 19 4:23 PM ` 11 GENERAL PROCEDURE FOR OPERATION 1. Add measured detergent to the washer, (Follow manufacturer s directions for safe use) 2. OPTIONAL STEP If desired, add measured liquid chlorine bleach to the bleach inlet, use only liquid chlorine in the bleach inlet * Follow manufacturer's direction for safe use. NOTE · Do not let bleach splash, drip, or run down into washer basket. Undiluted bleach will damage any fabric it touches. · Do not use this dispenser to add powdered chlorine or color safe bleach to your wash load. The dispenser is for liquid chlorine bleach use only. 3. [. . . ] If stain persists and the fabric allows, use a bleach. If stain persists rub in a little detergent and wash normally. Scrape off any fresh paint and sponge with a non flammable dry cleaning fluid and wash normally. Treat while still wet, rinse in WARM water and wash normally. [. . . ]