User manual DAEWOO ET 13P2

[. . . ] INSTRUCTION MANUAL Color Television ET ET 13P2 19P2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance. WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. NOTE TO CATV SYSTEM INSTALLER THIS REMINDER IS PROVIDED TO CALL THE CATV SYSTEM INSTALLER'S ATTENTION TO ARTICLE 820-40 OF THE NEC THAT PROVIDES GUIDELINES FOR PROPER GROUNDING AND, IN PARTICULAR, SPECIFIES THAT THE CABLE GROUND SHALL BE CONNECTED TO THE GROUNDING SYSTEM OF THE BUILDING, AS CLOSE TO THE POINT OF CABLE ENTRY AS PRACTICAL. CAUTION The AC power cord provided with this product is polarized (one blade wider than the other). To provide power to the TV, insert the AC plug into a standard 120V 60Hz polarized outlet. NOTE Never connect the plug to an electrical source other than one providing 120V 60Hz power. [. . . ] To quickly turn off the sound, press the MUTE button on the remote. The `MUTE' will appear on screen, colored green. To return the volume to its previous level, press MUTE again. Chapter 3: Operating Your TV 11 Changing the TV's Channel Memory Your TV's memory determines the channels that are available using the w CHv buttons. You can add channels to this memory or remove them from memory. If a channel is removed from memory, you can tune to it with the number buttons, but you cannot tune to it with the w CHv buttons. If there are just one channel memorized, then the Add/Delete Channels function will search the whole channels. But if there are two or more channel memorized, then the Add/Delete Channels function will search the memorized channels only. Adding/Deleting a channel to memory 1 Use the number buttons to tune to the channel. 2 Press the MENU button twice, then "Set-Up" menu will display. 3 Use the w CHv buttons to select "Add/Delete Channels", then use the CVOLB button to enter the "Add/Delete Channels" process. 4 If the channel is not in memory, then use the CVOLB button to add the channel from memory. 5 If the channel is in memory, then use the CVOLB button to delete the channel from memory. 6 If you are going to delete other channel, then press the w CHv buttons until desired channel is selected. And press the CVOLB button to delete the channel. 7 Wait 10 seconds, or press the MENU button four times to exit. 1 2 3 11 Set-Up Language : English Reception : Air Memorize Channels Add/Delete Channels Set-Up Language : English Reception : Air Memorize Channels Add/Delete Channels Select Adjust Next Select Adjust Next 4 5 6 Add/Delete Channels Air 11 This channel is not in memory. Press CH for other channels. Add/Delete Channels Air 11 This channel is in memory. Press CH for other channels. Add/Delete Channels Air 11 This channel is in memory. Press CH for other channels. Press MENU to return to Set-up menu. Press MENU to return to Set-up menu. Press MENU to return to Set-up menu. Displaying the Current Channel 1 To quickly see the current channel number and status, press DISPLAY button on the remote control. The current channel number and status will be displayed. 12 Chapter 3: Operating Your TV Adjusting Video Settings You may wish to adjust the video settings (e. contrast or color) to obtain the most pleasing picture. To do so, follow these directions: 1 With the TV on, press the MENU button. then "Video" menu will appear. [. . . ] If the other stations are OK, it may be a station problem. ¥ Check that the antenna is connected, is in good working order, has no broken wires, and adjusted correctly. There is poor reception on some channels. If the other stations are OK, it may be a station problem. [. . . ]