User manual DAEWOO FS-59T90

[. . . ] (Note) If you choose "R -input" mode, there will be no sound. If you choose "Stereo" mode, there will be only one speaker operating. RF OUTPUT (RCA JACK) This always provides the RF signal output of the selected channel. This is used to connect a VCR for recording or a monitor device for displaying. INPUT1 (SCART JACK) This is used to connect a VCR, a Camcorder, a S-VHS VCR. You can also receive the S-VHS singal with SCART JACK by selecting S-VHS mode with TV/VIDEO button. [. . . ] To enter the selected sub-menu, press remote control PICTURE/OK button . PICTURE SOUND FEATURES INSTALL CH MENU VOL VOL CH PICTURE/OK HOW TO USE SUB MENUS The following is applied to all of the sub-menus. CH VOL VOL Select the function you want to change using Remote control CURSOR UP or DOWN buttons. CH CH VOL VOL Adjust the function using Remote control CURSOR LEFT or RIGHT button. CH CH VOL VOL Confirm (if needed) by pressing Remote control PICTURE/OK button . CH PICTURE OK CH MENU VOL VOL Then Return to main menu pressing MENU button . CH 9 PICTURE MENU Select and adjust the level of each function : BRIGHT. CONTRAST COLOUR SHARP. PICTURE BRIGHT. CONTRAST COLOUR SHARP. SOUND MENU Select and adjust the level of each function : VOLUME BASS TREBLE BALANCE EFFECT Adjusted values are automatically stored in the favourite mode. SOUND VOLUME BASS TREBLE BALANCE EFFECT ___ 10 FEATURES MENU FORMAT Picture format selection. Select picture format between : - 4/3: normal size - 16/9: 16/9 size - Zoom : expanded picture. CHILD LOCK Child lock prevent the use of the TV set without remote control unit. Select this value ON or OFF: - When switched ON: the stand-by indicator is orange lighted, child lock is operating. - The set can only be switched ON with the remote control unit. - Note that if you turn off the set with the MAIN POWER button, the clock setting is lost and must be reset if necessary. The clock is set automatically if programme NO. 7 is selected for at least 6 seconds and programme NO. - Set TV clock with remote control 0. . . 9 NUMBER buttons, then clock starts. - The TV set turns on at the time and with the programme chosen by the customer. This function is only available when clock is set and when TV set is switched to stand -by mode. - Switch "wake up" function ON/OFF withremote control CURSOR LEFT or RIGHT button. - Enter wake up time with remote control 0. . . 9 NUMBER buttons. WAKE PR Select TV turn-on programme number. FEATURES FORMAT CHILD LOCK CLOCK WAKE TIME WAKE PR 4:3 OFF 00 : 00 OFF 01 11 INSTALL MENU AUTO SETUP Automatic Tuning system. STORE TO Programme storage number. INSTALL AUTO SETUP EDIT CHANNEL FREQ NAME PROGRAM STORE TO C 49 720, 01 ----01 01 EDIT MENU PR Programme number. Skip : programme skipped. EDIT PR 05 04 03 02 01 99 98 NAME CH 5 CH 4 --------------------CH C12 C22 C06 C08 C02 C10 C04 SKIP 12 AUTOMATIC TUNING SYSTEM PICTURE/OK Automatic Tuning System Select "AUTO SETUP" function. Press remote control button "PICTURE/OK" button for more than 3 seconds to start the automatic tuning. When automatic tuning is finished, recorded programmes are displayed on screen. PROGRAMME LIST EDITION Using the Edit Menu, you can easily modify the programme listing. Please do not refer programmes as "existing recorded programmes". Select "EDIT" function and confirm with the remote control "PICTURE/OK" button : Edit menu appears and shows existing recorded programmes. [. . . ] OTHER FUNCTIONS AVAILABLE Superimpose teletext broadcasting to the current TV program using MIX button Press MIX ( ) button again to return to the normal teletext display. Watch one TV programme and keep informed at the same time if some teletext pages are updated To do this, press CANCEL ( ) button . Then, TV programme appears on screen and the teletext symbol appears at the top of the screen. When teletext programme will be updated, concerned page number appears on screen. [. . . ]