User manual DAEWOO LVP505MS

[. . . ] S137W- BG/D(LENCO) 0. 10. 4 10:39 AM `A OWNER'S MANUAL Video Cassette Player LVP505MS High Quality S137W- BG/D(LENCO) 0. 10. 4 10:39 AM `1 DRAWING YOUR ATTENTION Thank you purchasing this VCP, develloped to provide advanced features and functions for high quality performance. To obtain the best results and to avoid malfunction, PLEASE CAREFULLY READ THE DESCRIPTIONS AND OPERATING PROCEDURE CONTAINED IN THIS OWNER'S MANUAL PRIOR TO OPERATING THIS VCP. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE OF THE ENCLOSURE. [. . . ] · SELF PICTURE ADJUSTMENT Since the HEAD DRUM rotates regularly depending on the voltage change or tape condition, the picture is always stable. · ENCORE FUNCTION Press the ENCORE key on the remote control to watch the desired picture once more during playback. · BUILT-IN WIDE RANGE MODULATOR (CH. 40) · BUILT-IN MULTI RF OUT MODULATOR (PAL-G/K/I) · AUTO REPEAT SEARCH FUNCTION If you press the A. REPEAT key during playback, the tape will be replayback after rewinding . · 2 STEP PICTURE SEARCH 8 S137W- BG/D(LENCO) 0. 10. 4 10:39 AM `9 TABLE OF CONTENTS NOTE: This Video Cassette Player is compatible with any Video Cassette Player bearing the VHS mark. The VCP is designed to expand your opportunities for home viewing and not for any usage which might violate the copyright laws. Save the original shipping carton and packing materials; they will come in handy if you ever have to ship your VCP. For maximum protection, repack the set as it was originally packed at the factory. LP K/I NTSC , REPEAT REC Slow Record Record Pause Auto Repeat Stop Tape Speed (Long Play) RF OUT system NTSC Video system 11 S137W- BG/D(LENCO) 0. 10. 6 9:42 AM ` 12 IDENTIFICATION (continued) REAR PANEL RF OUT TERMINAL (Connect to the antenna terminal of the TV receiver through the RF cable (provided)) AC POWER CORD ANT IN TERMINAL (Connect the TV antenna to this terminal) VIDEO IN/OUT JACK AUDIO IN/OUT JACK 12 S137W- BG/D(LENCO) 0. 10. 6 10:48 AM ` 13 REMOTE CONTROL OPERATION RANGE 1. Any object between the remote control and VCP will block the path of beam when it is being used. Dark walls, direct sunshine or very bright (incandescent) light will reduce the remote control sensitivity. Hold the remote control within an angle range of about 30° from either side of the remote sensor center as shown. 30° 30° 7m 3. When the remote control is vertical to the remote Sensor, it will work within about 23 feet (7m) from the VCP. Point the front of the remote control directly at the front of the VCP. 13 S137W- BG/D(LENCO) 0. 10. 4 10:39 AM ` 14 BATTERY INSTALLATION 1. Remove the battery cover on the reverse side of the remote control. Install 2 batteries ("AAA" size) into the remote control. (Carefully install batteries to match the polarity diagrams) 3 Close the battery cover. · It is advisable to take batteries out of the remote control when it is not in use for a long time. 14 S137W- BG/D(LENCO) 0. 10. 4 10:39 AM ` 15 IDENTIFICATION (continued) REMOTE CONTROL BASIC FUNCTIONS TV/VCR(Not used) ENCORE EJECT POWER-TURN ON/OFF AUTO REPEAT SLOW +/- PAUSE/STILL FRAME PLAYBACK REWIND/REVIEW STOP RETRACKING PAL/NTSC RECORD TRACKING ­/+ RF OUTPUT SELECTION SPEED FAST FORWARD/CUE 15 S137W- BG/D(LENCO) 0. 10. 4 10:39 AM ` 16 WHEN YOU USE THE REMOTE CONTROL · Do not press two keys at the same time. · Do not expose the remote sensor to the sunshine. · It causes the VCP not to operate. · Avoid direct sunshine and strong shock. · Keep the remote control away from dust and moisture. 16 S137W- BG/D(LENCO) 0. 10. 4 10:39 AM ` 17 TO GET STARTED ANTENNA CONNECTION 1. Remove the Antenna Cable from the TV set. [. . . ] This VCP select the system automatically according to the inserted tape (PAL or NTSC). When inserting the PAL tape, it will playback the PAL signal. When inserting the NTSC tape, it will playback the NTSC signal on PAL TV. (If you have NTSC TV, the picture will be black and white then you can take color picture by pressing PAL/NTSC key on the remote control. ) If you want to playback the NTSC tape on NTSC TV, connect the NTSC TV to this VCP with the line. * The LED display indicator will turn on according to the tape. [. . . ]