User manual DAEWOO SD-9100

[. . . ] DVD-VIDEO PLAYER Owner's Manual SS -9100/SD-31000 DD 91 0/ S D 31 - - Region code of DVD/Video player for home is region "2" or ALL. In inserting a disc with other region code, it does not operate. Please only use a disc with region code 2 or ALL. If this mark is displayed in operating the product, please wait for a while, then use it. [. . . ] · If programme timings overlap, the machine will give a warning message. If you don't adjust the times, the machine will record the first programme completely then continue with the second one. · If there is no sufficient free space for the recording on the cassette the video switches automatically to "LP" for double recording capacity. · The recorder will eject cassettes which have the safety tab removed. 26 Timer Recording Timer Review ­ changing and erasing 1 2 Call the player's "MAIN SETUP", choose "TIMER PROGRAM". TIMER PROGRAM PR 03 01 ------- START END DATE 21:20 22:20 14/10 18:10 -- : --- : --- : --- : --- : --- : -20:30 -- : --- : --- : --- : --- : --- : -20/10 -- / --- / --- / --- / --- / --- / -- PR+/-:SELECT OK:CONFIRM SETUP:END Select the programming to change or erase. If you want to erase this programming press button [0], confirm with OK. If you wish to make changes: Move to the position you want to change using the [< , >] buttons. Change the settings using the [PR +/­] or [number] buttons. If all settings are ok, press [< or >], until you see "OK: CONFIRM" in the bottom line. Exit the menus. TIMER PROGRAM (ONCE) PR 03 START TIME 21:20 END TIME 22:20 START DATE 14/10(SAT) TAPE SPEED SP VPS/PDC ON 0 :ERASE </>:CORRECT SETUP:END VCR Operation 27 More Functions s The counter counts in real time from the point you load the cassette. The counter does not count unrecorded parts of the tape. s If you rewind beyond the zero position, the counter counts in negative values (e. g. ­ 0:01:15). Clock / counter display Each time you press [DISPLAY] button, 1x: Time and date+current status Time and date 2x: Counter+current status counter 3x: disappear. But if you press [CLK/CNT] button, clock and counter on display window will change each other. STOP SP PR01 ARD STEREO ON 14:00 14/10 V E180 00:48 · If didn't wind tape (PLAY, FF, REW, . . . ), it doesn't appear the tape remain time. · In case that the timer recording information is inputted in the received broadcasting signal , press the button to display the VPS/PDC icon. Remaining time and cassette length TAPE CONTROL TAPE REMAIN GO TO ZERO COUNTER RESET INDEX+ INDEX- TAPE REMAIN E-180 E-240 E-300 PR+/-:SELECT OK:CONFIRM SETUP:END · Remaining time display is only possible when the cassette is loaded. E-240 01:27 PR+/-:SELECT OK:CONFIRM SETUP:END When you want the player to show the time remaining from the current player tape position (to find out if there is sufficient space for a recording, for example). To ensure the remaining time shown is accurate, select the length of cassette currently loaded by selecting this function until you reach the correct length. Accessing counter zero position The player will wind to the position 0:00:00 and stop. REW SP GO TO ZERO Resetting the counter to zero COUNTER RESET 0:02:13 Reset the counter. 0:00:00 and . . . Dimmer : Your player dims its display when switched to stand-by mode. Auto power off : Your player switches to stand-by when no tape is played and no station is received for more than 5 minutes. 28 More Functions 16 : 9 Wide Screen Format Playing back / Recording You can play and record the program of 16:9 Wide-Screen format with this player . · 16:9 Set -Auto : This video automatically detects the program format (16:9 or 4:3) and records or plays this program in the same format. -ON : The video will play or record all broadcasts in 16:9 format. 4:3 broadcasts will be converted to 16:9 format. -OFF : The video will play or record all broadcasts in 4:3 format only. · If you watch a program which is recorded by 16:9 wide screen format with this player, your TV must have 16:9 wide screen function and you have to connect TV and player with the A/V scart. VCR SETUP CLOCK SET LANGUAGE SET RF OUTPUT SET 16:9 SET OSD ON/OFF AUTO CLOCK PR+/-:SELECT OK:CONFIRM SETUP:END 16:9 SET AUTO OFF ON PR+/-:SELECT OK:CONFIRM SETUP:END AUTO REPEAT If you press the [PLAY] button for 5secs during stop or still mode, it goes Auto repeat mode. This player plays repeatedly the tape from the beginning to end parts. [. . . ] Checks If a DVD is from overseas, it may not be played. Please check a DVD's region code whether it has the relative region code 2 or All. Please check whether a DVD is inserted in a right direction. If it is a CD-ROM for PC or DVD-ROM, it does not work. [. . . ]