User manual DAEWOO SD-9500

[. . . ] DVD-VIDEO PLAYER Owner's Manual Owner's Manual SD-9500/SD-3500 - Region code of DVD/Video player for home is region "2" or ALL. In inserting a disc with other region code, it does not operate. Please only use a disc with region code 2 or ALL. If this mark is displayed in operating the product, please wait for a while, then use it. [. . . ] -OFF : The video will play or record all broadcasts in 4:3 format only. · If you watch a program which is recorded by 16:9 wide screen format with this player, your TV must have 16:9 wide screen function and you have to connect TV and player with the A/V scart. VCR SETUP CLOCK SET LANGUAGE SET RF OUTPUT SET 16:9 SET OSD ON/OFF AUTO CLOCK PR+/-:SELECT OK:CONFIRM SETUP:END Clock / counter display Each time you press [DISPLAY] button, 1x: Time and date+current status Time and date 2x: Counter+current status counter 3x: disappear. But if you press [CLK/CNT] button, clock and counter on display window will change each other. STOP SP PR01 ARD STEREO ON 16:9 SET AUTO OFF ON PR+/-:SELECT OK:CONFIRM SETUP:END 14:00 14/10 V E180 00:48 · If didn't wind tape (PLAY, FF, REW, . . . ), it doesn't appear the tape remain time. · In case that the timer recording information is inputted in the received broadcasting signal , press the button to display the VPS/PDC icon. AUTO REPEAT If you press the [PLAY] button for 5secs during stop or still mode, it goes Auto repeat mode. This player plays repeatedly the tape from the beginning to end parts. To release this mode, press the [ ] button or mode operation button. (PLAY, FF, REW or STOP) Remaining time and cassette length TAPE CONTROL TAPE REMAIN GO TO ZERO COUNTER RESET INDEX+ INDEX- TAPE REMAIN E-180 E-240 E-300 PR+/-:SELECT OK:CONFIRM SETUP:END · Remaining time display is only possible when the cassette is loaded. E-240 01:27 VCR Operation SETUP languages Call the player's "MAIN SETUP", choose "VCR SETUP", then "LANGUAGE SET". Confirm. LANGUAGE SET ENGLISH DEUTSCH ITALIANO ESPAÑOL FRANÇAIS NEDERLANDS PR+/-:SELECT OK:CONFIRM SETUP:END When you want the player to show the time remaining from the current player tape position (to find out if there is sufficient space for a recording, for example). To ensure the remaining time shown is accurate, select the length of cassette currently loaded by selecting this function until you reach the correct length. PR+/-:SELECT OK:CONFIRM SETUP:END Accessing counter zero position The player will wind to the position 0:00:00 and stop. REW SP GO TO ZERO Child lock Press the [ ] button for about 5 seconds. No buttons of front panel can be operated now and LOCK INDICATOR ("LOCK") will be displayed on window display. Keep your remote control in a safe place. To release child lock, press any button of the remote control. Resetting the counter to zero COUNTER RESET 0:02:13 Reset the counter. Cassettes PAL 0:00:00 and . . . Dimmer : Your player dims its display when switched to stand-by mode. Auto power off : Your player switches to stand-by when no tape is played and no station is received for more than 5 minutes. Use only good quality tape cassettes with the VHS logo. ·Keep cassettes away from excessive moisture or dust, magnetic and electrical fields (loud speakers and computer monitors, for example). ·Always wind the tape to the beginning when you have finished. Store with the full spool at the bottom and with the cassette in its cover. You can protect your precious recordings from being wiped by breaking out the safety tab on the side of the cassette (some cassettes have a slide). Should you wish to re-use the tape after removing the tab, cover the hole with adhesive tape. 28 29 More Functions Connections and Copying s If you are using a SCART cable, select the AV input on the TV to see the picture from the player. s If you are not using a SCART cable, select the button number on the TV reserved for video input to see the picture from the player. s The player machine records the complete sound signal transmitted by the TV station. s On the mono VCR, you will hear the normal mono sound. The Hi-Fi system (SD-9500 only) In addition to the normal mono sound track of VHS video recorders, your player machine is equipped with a high-quality Hi-Fi sound system. This means you can enjoy · films with excellent stereo sound · films of full-length concerts in high quality stereo · films with impressive Surround Sound using additional Surround equipment · films with two dialogue modes (dual, bilingual), usually the original sound track and dubbed sound track · VHS cassettes with Hi-Fi stereo sound and VHS cassette with normal sound To the TV via antenna cable (if you are not using a SCART cable) If you are not using a SCART cable, your player can transmit pictures and sound to the TV via the coax aerial cable. Just tune the TV to the player's transmitting channel (factory set to UHF CH 52). [. . . ] Specifications Power Consumed electricity Weight Dimension (W x H x D) Operative temperature Installation condition Signal type Antenna Input/output VIDEO input AUDIO input VIDEO output (common use of DVD and VCR) VIDEO output (DVD only) AUDIO output (DVD only) Playable tape Playable disc Tape speed Playtime Clock display Time Recording Persistence in power failure VIDEO S/N (VCR) Resolution AUDIO (VCR) AUDIO (DVD) AUDIO dynamic range VCR DVD 230V~, 50/60Hz Hi-Fi : 26W, Mono : 25W 4. 6kg 435mmx93mmx255mm +5°C~40°C Horizontal / Relative humidity under 80% PAL COLOR U/V-mixed: 75 unbalanced 1. 0Vp-p (unbalanced, RCA JACK) -8. 8dBm, RCA JACK VIDEO output terminal, 1. 0 Vp-p unbalanced, RCA JACK, SCART JACK RGB output (75 In load R: 0. 7Vp-p, G:0. 7Vp-p, B:0. 7Vp-p) Analogue AUDIO output : 2. 0Vrms Digital audio output (OPTICAL, COAXIAL) Very high dense tapes with VHS marks DVD, VIDEO-CD, CD (12mm), CD (8mm), MP3, CD-R, CD-RW SP: 23. 39mm/s, LP: 11. 70mm/s SP: 3hrs, LP: 6hrs (use of E180tape) 24 hrs 8 programs a month 1min Over 43dB(Standard recording) Over 240 lines (Standard recording) Over 500 lines (Playback DVD) Over 65dB(Hi-Fi), Over 40dB(Mono) 90dB 90dB Checks If a DVD is from overseas, it may not be played. Please check a DVD's region code whether it has the relative region code 2 or All. Please check whether a DVD is inserted in a right direction. If it is a CD-ROM for PC or DVD-ROM, it does not work. [. . . ]