User manual DAEWOO SD-9500P

[. . . ] DVD-VIDEO PLAYER Owner's Manual Owner's Manual SD-9500P/SD-9800P SD-3500P/SD-3800P - Region code of DVD/Video player for UK is region "2" or ALL. Inserting a disc with another region code, it will not operate. Please only use a disc with region code 2 or ALL. If this mark is displayed in operating the product, please wait for a while, then use it. [. . . ] -ON : The video will play or record all broadcasts in 16:9 format. 4:3 broadcasts will be converted to 16:9 format. -OFF : The video will play or record all broadcasts in 4:3 format only. · If you watch a program which is recorded by 16:9 wide screen format with this player, your TV must have 16:9 wide screen function and you have to connect TV and player with the A/V scart. VCR SETUP CLOCK SET RF OUTPUT SET 16:9 SET OSD ON/OFF AUTO CLOCK PR+/-:SELECT OK:CONFIRM SETUP:END 16:9 SET AUTO OFF ON PR+/-:SELECT OK:CONFIRM SETUP:END AUTO REPEAT If you press the [PLAY] button for 5secs during stop or still mode, it goes into Auto repeat mode. This player plays repeatedly the tape from the beginning to end parts. To release this mode, press the [ ] button or mode operation button. (PLAY, FF, REW or STOP) VCR Operation Child lock Press the [ ] button for about 5 seconds. No buttons of front panel can be operated now and LOCK INDICATOR ("LOCK") will be displayed on window display. Keep your remote control in a safe place. To release child lock, press any button of the remote control. Cassettes PAL Use only good quality tape cassettes with the VHS logo. ·Keep cassettes away from excessive moisture or dust, magnetic and electrical fields (loud speakers and computer monitors, for example). ·Always wind the tape to the beginning when you have finished. Store with the full spool at the bottom and with the cassette in its cover. You can protect your precious recordings from being wiped by breaking out the safety tab on the side of the cassette (some cassettes have a slide). Should you wish to re-use the tape after removing the tab, cover the hole with adhesive tape. and . . . Dimmer : Your player dims its display when switched to stand-by mode. Auto power off : Your player switches to stand-by when no tape is played and no tuning signal is received for more than 5 minutes. 31 More Functions I The player records the complete sound signal transmitted by the TV station. I On the mono VCR, you will hear the normal mono sound. The Hi-Fi system (SD-9500P&SD-9800P only) In addition to the normal mono sound track of VHS video recorders, your player is equipped with a highquality Hi-Fi sound system. This means you can enjoy · films with excellent stereo sound · films of full-length concerts in high quality stereo · films with impressive Surround Sound using additional Surround equipment · films with two dialogue modes (dual, bilingual), usually the original sound track and dubbed sound track · VHS cassettes with Hi-Fi stereo sound and VHS cassette with normal sound What you can listen to (SD-9500P&SD-9800P only) During Stop, the player displays what the current station is broadcasting. When you switch to another station or the current station changes the sound mode, your player displays the programme and sound mode on screen (if not, press AUDIO). · "STEREO" = stereo "BIL I / BIL II "=bilingual nothing= monaural sound During Playback, the player displays what is recorded on the cassette (if not, press AUDIO). · "Hi-Fi" = stereo/bilingual nothing = monaural sound STOP SP PR10 EURO STEREO ON PLAY SP Hi-Fi L+R Choice of sound output (SD-9500P&SD-9800P only) During a stereo performance (playback-"Hi-Fi"/ broadcast - "STEREO"): Hi-Fi stereo left audio channel only right channel only the normal mono sound track of a Hi-Fi cassette PLAY SP HI-Fi LEFT Hi-Fi RIGHT Hi-Fi OFF Hi-Fi L+R · During broadcasting a bilingual performance : Main language (original sound track) sub-language (dubbed) both main language and sub-language OFF. · For mono performances , there is no choice available. STOP SP BIL II BIL I+II BIL OFF PR10 EURO BIL I 32 Connections and Copying I If you are using a SCART cable, select the AV input on the TV to see the picture from the player. [. . . ] If a DVD does not include language information, it does not support the function. "ANGLE" is supported only in a DVD contains multi angle scenes. Also a user can confirm the support with the "ANGLE" mark on screen. Please check the degree of remote control, distance or any interruption. [. . . ]