User manual DAEWOO SL820 annexe 1

[. . . ] 24 HR REAL TIME / 1280 HR TIME LAPSE RECORDER User's Guide SL820 15540 Herriman Blvd. - Noblesville, IN 46060 1-800-774-0284 - www. security-labs. com Be sure to read carefully and follow all the SAFETY INFORMATION on pages i, ii, iii. Keep the manual in a safe place for future reference. P/N : 97P95600N0-52 Safety information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. [. . . ] Press the MENU, SHIFT , SHIFT , SHIFT buttons in sequence to display the TIMER PROGRAM SET(1) menu. Press the SET - (or +) button to set the recording stop minutes (eg : 00), then press the SHIFT button. 10 Press the SET - (or +) button to select the recording speed (eg : 18), then press the SHIFT button. · The cursor is moved to the N/Y position. 11 Press the SET - (or +) button to select "Y". recording will not take place Programmed timer recording Example 1 · The white block cursor is on "SUN"(Sunday). 4 5 6 Press the SHIFT button, until the cursor is on "THU". Press the SHIFT button. · The cursor is moved to the recording start hour position. Press the SET - (or +) button to set the recording start hour (eg : 10), then press the SHIFT button. · The cursor is moved to the recording start minutes position. · Repeat steps 4 to 11 to program timer recordings for other days of the week. · To set two or more timer recordings the same day of the week, press the SHIFT button, until the cursor located in the day of the week for the second recording, then press the SET - (or +) button, to set the desired day of the week. With each press of the SET - ( or +) button, the day will change as indicated below. SET - : direction , SET + : direction 7 Press the SET - (or +) button to set the recording start minute (eg : 00), then the SHIFT button. · The cursor is moved to the recording stop hour position. 8 Press the SET - (or +) button to set the recording stop hour (eg : 18), then press the SHIFT button. · The cursor is moved to the recording stop minutes position. · To modify or cancel timer recording, press the STANDBY/ON(POWER) button to cancel the timer recording mode. 12 Press the MENU button three times, the normal screen is displayed. · The timer recording indicator " "will light on the display panel. The VCR is now in timer recording stand-by mode. 17 16 Time Lapse Video Cassette Recorder Time Lapse Video Cassette Recorder Example 2 : To record everyday from 10 : 00 to 18 : 00, in 18-hour mode (recording speed) 1 2 Repeat steps 1 to 3. Press the SHIFT button, until the cursor is on "DLY". The MENU below is displayed. To Cancel a Program Timer Recording 1 2 Repeat step 1 above. Press the SHIFT (or ) button until the cursor is located in the "Y" corresponding to the timer recording to cancel. Press the SET - (or +) button, to select "N". Press the MENU button three times until the normal screen is displayed. Press the STANDBY/ON(POWER) button. · The clear button can erase the programmed timer recording in the line that the cursor is located. 3 4 5 3 Repeat steps 5 to 13. Programmed timer recording Example 2 Notes. . . · During timer recording all the buttons on the VCR, except the STOP button, are disabled. If the STOP button is pressed for three seconds during timer recording, the recording will stop. During timer recording stand-by, press the STANDBY/ON(POWER) button if the buttons do not respond. · If there is a power loss, the recording will be interrupted. When the power is restored, the recording will resume if the stop time has not yet been reached, and " " will be flashing on the display panel. The VCR internal battery is completely charged after the VCR has been connected to an AC power outlet for 48 hours, and it will maintain all the VCR settings memory for up to 30 days. · Set the timer recordings so that the recording times do not overlap. If they do, the one with the earliest recording start time will have priority. [. . . ] The video heads should be cleaned and inspected every 1, 000 hours. The video heads usage can be checked using initial menu, running time. - Load a cassette tape with erasure prevention tab or cover the tab hole with adhesive tape. - Be sure to select "YES" for autorepeat recording. - Set "YES" again for autorepeat recording. "NO" is selected for autorepeat recording in the REC MODE SET menu. [. . . ]