User manual DAEWOO TVD-960N

[. . . ] 40 HOUR REAL TIME / 960 HOUR TIME LAPSE RECORDER User's Guide TVD­960N EJECT REC Be sure to read carefully and follow all the SAFETY INFORMATION on pages i, ii, iii. Keep the manual in a safe place for future reference. P/N : 97P95600N0-D5 Safety information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. [. . . ] 10 Press the SET - (or +) button to select the recording speed (eg : 18), then press the SHIFT button. · The cursor is moved to the N/Y position. Example 2 : To record everyday from 10 : 00 to 18 : 00, in 18-hour mode (recording speed) 1 2 Repeat steps 1 to 3. Press the SHIFT button, until the cursor is on "DLY". The MENU below is displayed. 11 Press the SET - (or +) button to select "Y". recording will not take place Programmed timer recording Example 1 3 Repeat steps 5 to 13. Programmed timer recording Example 2 · Repeat steps 4 to 11 to program timer recordings for other days of the week. · To set two or more timer recordings the same day of the week, press the SHIFT button, until the cursor located in the day of the week for the second recording, then press the SET - (or +) button, to set the desired day of the week. With each press of the SET - ( or +) button, the day will change as indicated below. Changing a Program Timer Recording 1 Press the MENU, SHIFT , SHIFT , SHIFT buttons in sequence to display the TIMER PROGRAM SET(1) menu. Press the SHIFT (or ) button, until the cursor is located in the setting to correct. Press the SET - (or +) button, to correct the setting. · Press the MENU button three times until the normal screen is displayed. 2 SET - : direction , SET + : direction 3 · To modify or cancel timer recording, press the STANDBY/ON(POWER) button to cancel the timer recording mode. 12 Press the MENU button three times, the normal screen is displayed. · The timer recording indicator " "will light on the display panel. The VCR is now in timer recording stand-by mode. 4 Press the STANDBY/ON(POWER) button. 18 Time Lapse Video Cassette Recorder Time Lapse Video Cassette Recorder 19 Alarm Recording To Cancel a Program Timer Recording 1 2 Repeat step 1 above. Press the SHIFT (or ) button until the cursor is located in the "Y" corresponding to the timer recording to cancel. Press the SET - (or +) button, to select "N". Press the MENU button three times until the normal screen is displayed. Press the STANDBY/ON(POWER) button. · The clear button can erase the programmed timer recording in the line that the cursor is located. Alarm Recording Setting Alarm recording is performed when there is an input (trigger) at the ALARM IN terminal, " " is displayed on the display panel. 2 Press the MENU, SHIFT , SHIFT buttons in sequence to display the REC MODE SET menu . 3 Press the SHIFT button until the arrow mark ( ) points to ALARM REC SET. 4 Press the SHIFT button to display the ALARM REC SET menu. 3 4 5 Notes. . . · During timer recording all the buttons on the VCR, except the STOP button, are disabled. If the STOP button is pressed for three seconds during timer recording, the recording will stop. During timer recording stand-by, press the STANDBY/ON(POWER) button if the buttons do not respond. · If there is a power loss, the recording will be interrupted. When the power is restored, the recording will resume if the stop time has not yet been reached, and " " will be flashing on the display panel. [. . . ] - Unplug the power cord then plug it back in. Panic recording. The cassette tape cannot be ejected The security lock(SET LOCK) is engaged. The loaded cassette has no erasure prevention tab. - Load a cassette tape with erasure prevention tab or cover the tab hole with adhesive tape. - Be sure to select "YES" for autorepeat recording. - Set "YES" again for autorepeat recording. "NO" is selected for autorepeat recording in the REC MODE SET menu. [. . . ]