User manual DAEWOO VR2945

[. . . ] DVD Recorder + VCR VR2945 User Manual DF-L72B1N-BS(GB) 04. 7. 1 3:9 AM 1 Important Safeguards INTRODUCTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated `dangerous voltage` within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION POUR VITER LES CHOC LECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. WARNING: Do not install this equipment in a confined space such as a bookcase or similar unit. CLASS 1 KLASSE 1 LUOKAN 1 KLASS 1 CLASSE 1 LASER PRODUCT LASER PRODUKT LASER LAITE LASER APPARAT PRODUIT LASER NOTE TO CABLE/TV INSTALLER: This reminder is provided to call the cable TV system installer's attention to Article 820-40 of the National Electric Code (U. S. A. ). [. . . ] The on-screen display appears on the TV screen. Use [. . . ] to select the `Chapter` icon on the on-screen display. Press [ENTER] to confirm. Angle Shows the current angle number and total number of angles, and changes the angle number. 1 2 3 4 Press [DISPLAY] during playback. The on-screen display appears on the TV screen. Use [. . . ] to select the `Angle` icon on the on-screen display. SETUP Audio Shows the current audio soundtrack language, encoding method, and channel number, and changes the setting. 1 2 3 4 Press [DISPLAY] during playback. The on-screen display appears on the TV screen. Use [. . . ] to select the `Audio` icon on the on-screen display. Press [ENTER] to confirm. Subtitle Shows the current subtitle language, and changes the setting. 1 2 3 4 Press [DISPLAY] during playback. The on-screen display appears on the TV screen. Use [. . . ] to select the `Subtitle` icon on the on-screen display. Press [ENTER] to confirm. Elapsed Shows the elapsed playing time, and skips to the desired time. 1 2 3 4 Press [DISPLAY] during playback. The on-screen display appears on the TV screen. Use [. . . ] to select the `Elapsed' icon on the on-screen display. Use [. . . ] to change the numbers and use [oe ] to move left or right. Within 7 seconds, press [ENTER] to confirm the start time. Playback starts from the selected time on the disc. For the title recorded without DVD navigation information, such as the one from broadcast or line input, "Elapsed" function does not work. 37 DF-L72B1N-BS(GB) 04. 7. 1 3:10 AM á^38 DVD Playback Playing a DVD 1 Press the [DVD] button to set the remote control to operate the DVD deck. Turn the TV on and select the video input source connected to the DVD Recorder+VCR. Audio system: Turn the audio system on and select the input source connected to the DVD Recorder+VCR. 2 Press [EJECT] to open the disc tray. 3 Load your disc in the tray with the playback side down (label side up). 5 READING appears on the front panel display, and playback starts automatically. If playback does not start, press [PLAY ()]. [. . . ] DVD Recorder+VCR Audio/Video Out is not selected for viewing at the TV. DVD Recorder+VCR's TV audio channel is set to SAP or MONO. The remote control is not pointed at Remote control does not the remote sensor of the DVD work properly. The remote control is too far from the DVD Recorder+VCR. [. . . ]